SPECIALTY PROFILES
Shop by category
All products in this category
-
3.000 mm Shank DIA x 60° included - AlTiN Coated
MICRO 100
$31.203.000 mm Shank DIA x 60° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RSCM-030-1X$31.20 -
3.000 mm Shank DIA x 60° included
MICRO 100
$26.253.000 mm Shank DIA x 60° included Carbide Tipped EngraverMIC100-RSCM-030-1$26.25 -
0.5000" (1/2) Shank DIA x 60° included DE
MICRO 100
$207.150.5000" (1/2) Shank DIA x 60° included Carbide Tipped Engraver DEMIC100-RSC-500-2$207.15 -
0.3750" (3/8) Shank DIA x 60° included DE
MICRO 100
$176.800.3750" (3/8) Shank DIA x 60° included Carbide Tipped Engraver DEMIC100-RSC-375-24$176.80 -
0.3750" (3/8) Shank DIA x 60° included
MICRO 100
$160.100.3750" (3/8) Shank DIA x 60° included Carbide Tipped EngraverMIC100-RSC-375-14$160.10 -
0.3125" (5/16) Shank DIA x 60° included DE
MICRO 100
$137.800.3125" (5/16) Shank DIA x 60° included Carbide Tipped Engraver DEMIC100-RSC-312-24$137.80 -
12.000 mm Cutter DIA x 55.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$309.1012.000 mm Cutter DIA x 55.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-120-472X$309.10 -
12.000 mm Cutter DIA x 36.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$309.1012.000 mm Cutter DIA x 36.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-120-436X$309.10 -
12.000 mm Cutter DIA x 36.00 mm Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$309.1012.000 mm Cutter DIA x 36.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedMIC100-SBMM-120-236X$309.10 -
10.000 mm Cutter DIA x 55.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$263.4010.000 mm Cutter DIA x 55.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-100-472X$263.40 -
10.000 mm Cutter DIA x 50.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$263.4010.000 mm Cutter DIA x 50.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-100-450X$263.40 -
10.000 mm Cutter DIA x 30.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$263.4010.000 mm Cutter DIA x 30.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-100-430X$263.40 -
4.000 mm Shank DIA x 30° included
MICRO 100
$33.454.000 mm Shank DIA x 30° included Carbide Tipped EngraverMIC100-RTCM-040-1$33.45 -
3.000 mm Shank DIA x 30° included DE - AlTiN Coated
MICRO 100
$41.853.000 mm Shank DIA x 30° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RTCM-030-2X$41.85 -
3.000 mm Shank DIA x 30° included DE
MICRO 100
$34.953.000 mm Shank DIA x 30° included Carbide Tipped Engraver DEMIC100-RTCM-030-2$34.95 -
3.000 mm Shank DIA x 30° included - AlTiN Coated
MICRO 100
$31.203.000 mm Shank DIA x 30° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RTCM-030-1X$31.20 -
3.000 mm Shank DIA x 30° included
MICRO 100
$26.253.000 mm Shank DIA x 30° included Carbide Tipped EngraverMIC100-RTCM-030-1$26.25 -
0.5000" (1/2) Shank DIA x 30° included DE
MICRO 100
$193.050.5000" (1/2) Shank DIA x 30° included Carbide Tipped Engraver DEMIC100-RTC-500-2$193.05 -
0.3750" (3/8) Shank DIA x 30° included DE
MICRO 100
$177.850.3750" (3/8) Shank DIA x 30° included Carbide Tipped Engraver DEMIC100-RTC-375-24$177.85 -
0.2500" (1/4) Shank DIA x 30° included DE - AlTiN Coated
MICRO 100
$81.600.2500" (1/4) Shank DIA x 30° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RTC-250-2X$81.60