PLASTICS & COMPOSITES
Shop by category
All products in this category
-
1 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC, SFP-125-22
MICRO 100
$46.850.1250" (1/8) CUTTER DIA X 0.250" (1/4) LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFP-125-22$46.85 -
1 FL - 0.0625" (1/16) Cutter DIA x 0.250" (1/4) LOC, SFP-062-22
MICRO 100
$53.050.0625" (1/16) CUTTER DIA X 0.250" (1/4) LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFP-062-22$53.05 -
1 FL - 0.2500" (1/4) Cutter DIA x 0.375" (3/8) LOC, SFL-250-43
MICRO 100
$54.600.2500" (1/4) CUTTER DIA X 0.375" (3/8) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTEMIC100-SFL-250-43$54.60 -
1 FL - 0.1875" (3/16) Cutter DIA x 0.500" (1/2) LOC, SFL-187-33
MICRO 100
$51.750.1875" (3/16) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTEMIC100-SFL-187-33$51.75 -
1 FL - 0.1250" (1/8) Cutter DIA x 0.500" (1/2) LOC, SFL-125-44
MICRO 100
$54.600.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTEMIC100-SFL-125-44$54.60 -
1 FL - 0.1250" (1/8) Cutter DIA x 0.500" (1/2) LOC, SFL-125-24
MICRO 100
$46.850.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTEMIC100-SFL-125-24$46.85 -
1 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC, SFL-125-22
MICRO 100
$46.850.1250" (1/8) CUTTER DIA X 0.250" (1/4) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTEMIC100-SFL-125-22$46.85 -
1 FL - 0.0625" (1/16) Cutter DIA x 0.250" (1/4) LOC, SFL-062-42
MICRO 100
$62.500.0625" (1/16) CUTTER DIA X 0.250" (1/4) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTEMIC100-SFL-062-42$62.50 -
1 FL - 12.000 mm Cutter DIA x 30.00 mm LOC, SFPM-120-10
MICRO 100
$137.0512.000 MM CUTTER DIA X 30.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-120-10$137.05 -
1 FL - 6.000 mm Cutter DIA x 20.00 mm LOC, SFPM-060-60
MICRO 100
$83.856.000 MM CUTTER DIA X 20.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-060-60$83.85 -
1 FL - 6.000 mm Cutter DIA x 16.00 mm LOC, SFPM-060-10
MICRO 100
$71.906.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-060-10$71.90 -
1 FL - 5.000 mm Cutter DIA x 28.00 mm LOC, SFPM-050-60
MICRO 100
$77.155.000 MM CUTTER DIA X 28.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-60$77.15 -
1 FL - 5.000 mm Cutter DIA x 28.00 mm LOC, SFPM-050-50
MICRO 100
$71.905.000 MM CUTTER DIA X 28.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-50$71.90 -
1 FL - 5.000 mm Cutter DIA x 16.00 mm LOC, SFPM-050-40
MICRO 100
$71.905.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-40$71.90 -
1 FL - 5.000 mm Cutter DIA x 16.00 mm LOC, SFPM-050-10
MICRO 100
$68.805.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-10$68.80 -
1 FL - 4.000 mm Cutter DIA x 20.00 mm LOC, SFPM-040-70
MICRO 100
$73.454.000 MM CUTTER DIA X 20.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-040-70$73.45 -
1 FL - 4.000 mm Cutter DIA x 12.00 mm LOC, SFPM-040-50
MICRO 100
$55.604.000 MM CUTTER DIA X 12.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-040-50$55.60 -
1 FL - 4.000 mm Cutter DIA x 12.00 mm LOC, SFPM-040-10
MICRO 100
$54.004.000 MM CUTTER DIA X 12.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-040-10$54.00 -
1 FL - 3.000 mm Cutter DIA x 18.00 mm LOC, SFPM-030-60
MICRO 100
$60.003.000 MM CUTTER DIA X 18.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-030-60$60.00 -
1 FL - 3.000 mm Cutter DIA x 8.00 mm LOC, SFPM-030-50
MICRO 100
$55.603.000 MM CUTTER DIA X 8.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-030-50$55.60