HELICAL
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - APLUS Coated
- SKU:
- HELSO1-05427
- MPN:
- 05427
- Shipping:
- Calculated at Checkout
Description
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEF-L-50437)
View AllClose
Additional Information
Cutter Diameter: |
0.4375" (7/16) |
Length of Cut: |
2.0000" (2) |
Overall Length: |
4.0000" (4) |
Flutes: |
5 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.4375" (7/16) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - APLUS Coated
HELICAL
$85.20
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide Square End Mill for Steel,...
HELSO1-89678
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$75.60
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50437)
HELSO1-88245
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5625" (9/16) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$58.70
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5625" (9/16) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEF-S-50437)
HELSO1-05397
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.0000" (1) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$61.90
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.0000" (1) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEF-R-50437)
HELSO1-05412
7 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5625" (9/16) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$61.20
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5625" (9/16) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HSF-S-70437)
HELSO1-24242