HELICAL
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
- SKU:
- HELSO1-88245
- MPN:
- 88245
- Shipping:
- Calculated at Checkout
Description
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50437)
View AllClose
Additional Information
Cutter Diameter: |
0.4375" (7/16) |
Length of Cut: |
0.8750" (7/8) |
Overall Length: |
2.7500" (2-3/4) |
Flutes: |
5 |
Shank Diameter: |
0.4375" (7/16) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$71.70
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-R-40437)
HELSO1-30422
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - TPLUS Coated
HELICAL
$88.05
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Stainless and High Temp, 4 Flutes, TPLUS Coated -...
HELSO1-88169
4 FL - Ball - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$86.70
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Ball End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-R-40437-BN)
HELSO1-56422
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - TPLUS Coated
HELICAL
$92.35
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...
HELSO1-88254
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.6250" (5/8) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$65.60
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-S-40437)
HELSO1-30407