MILLING TOOLS
Shop by category
-
2 FL - 0.0140" Cutter DIA x 0.042" LOC
MICRO 100
$48.350.0140" Cutter DIA x 0.042" Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RME-014-2$48.35 -
2 FL - 0.0130" Cutter DIA x 0.039" LOC
MICRO 100
$48.350.0130" Cutter DIA x 0.039" Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RME-013-2$48.35 -
2 FL - 0.0120" (.3 mm) Cutter DIA x 0.036" LOC - AlTiN Coated
MICRO 100
$60.700.0120" (.3 mm) Cutter DIA x 0.036" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedMIC100-RME-012-2X$60.70 -
2 FL - 0.0110" Cutter DIA x 0.033" LOC - AlTiN Coated
MICRO 100
$60.700.0110" Cutter DIA x 0.033" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedMIC100-RME-011-2X$60.70 -
2 FL - 0.0100" Cutter DIA x 0.030" LOC - AlTiN Coated
MICRO 100
$66.800.0100" Cutter DIA x 0.030" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedMIC100-RME-010-2X$66.80 -
2 FL - 0.0100" Cutter DIA x 0.030" LOC
MICRO 100
$62.750.0100" Cutter DIA x 0.030" Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RME-010-2$62.75 -
12.000 mm Shank DIA x 90° included - AlTiN Coated
MICRO 100
$138.2512.000 mm Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RNCM-120-1X$138.25 -
8.000 mm Shank DIA x 90° included - AlTiN Coated
MICRO 100
$69.658.000 mm Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RNCM-080-1X$69.65 -
6.000 mm Shank DIA x 90° included DE - AlTiN Coated
MICRO 100
$62.806.000 mm Shank DIA x 90° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RNCM-060-2X$62.80 -
6.000 mm Shank DIA x 90° included DE
MICRO 100
$49.206.000 mm Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNCM-060-2$49.20 -
6.000 mm Shank DIA x 90° included
MICRO 100
$36.206.000 mm Shank DIA x 90° included Carbide Tipped EngraverMIC100-RNCM-060-1$36.20 -
4.000 mm Shank DIA x 90° included - AlTiN Coated
MICRO 100
$34.954.000 mm Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RNCM-040-1X$34.95 -
3.000 mm Shank DIA x 90° included DE - AlTiN Coated
MICRO 100
$37.353.000 mm Shank DIA x 90° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RNCM-030-2X$37.35 -
3.000 mm Shank DIA x 90° included DE
MICRO 100
$31.203.000 mm Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNCM-030-2$31.20 -
3.000 mm Shank DIA x 90° included - AlTiN Coated
MICRO 100
$27.853.000 mm Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RNCM-030-1X$27.85 -
3.000 mm Shank DIA x 90° included
MICRO 100
$23.453.000 mm Shank DIA x 90° included Carbide Tipped EngraverMIC100-RNCM-030-1$23.45 -
0.5000" (1/2) Shank DIA x 90° included DE
MICRO 100
$180.950.5000" (1/2) Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNC-500-2$180.95 -
2 FL - 1.500 mm Cutter DIA x 4.20 mm LOC
MICRO 100
$28.751.500 mm Cutter DIA x 4.20 mm Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RMEM-015-2$28.75 -
2 FL - 1.300 mm Cutter DIA x 3.90 mm LOC
MICRO 100
$28.751.300 mm Cutter DIA x 3.90 mm Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RMEM-013-2$28.75 -
2 FL - 1.200 mm Cutter DIA x 3.80 mm LOC
MICRO 100
$28.751.200 mm Cutter DIA x 3.80 mm Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RMEM-012-2$28.75