MILLING TOOLS
Shop by category
-
1 FL - 0.2188" (7/32) Cutter DIA x 0.750" (3/4) LOC
MICRO 100
$48.750.2188" (7/32) Cutter DIA x 0.750" (3/4) Length of Cut Carbide Square Downcut End Mill for Plastic, 1 FluteMIC100-SFL-218-46$48.75 -
1 FL - 0.1875" (3/16) Cutter DIA x 0.500" (1/2) LOC
MICRO 100
$48.750.1875" (3/16) Cutter DIA x 0.500" (1/2) Length of Cut Carbide Square Upcut for Plastic, 1 FluteMIC100-SFP-187-44$48.75 -
1 FL - 0.1562" (5/32) Cutter DIA x 0.625" (5/8) LOC
MICRO 100
$48.750.1562" (5/32) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square Upcut for Plastic, 1 FluteMIC100-SFP-156-45$48.75 -
8.000 mm Shank DIA x 30° included DE - AlTiN Coated
MICRO 100
$90.358.000 mm Shank DIA x 30° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RTCM-080-2X$90.35 -
8.000 mm Shank DIA x 30° included DE
MICRO 100
$77.908.000 mm Shank DIA x 30° included Carbide Tipped Engraver DEMIC100-RTCM-080-2$77.90 -
8.000 mm Shank DIA x 30° included
MICRO 100
$58.008.000 mm Shank DIA x 30° included Carbide Tipped EngraverMIC100-RTCM-080-1$58.00 -
6.000 mm Shank DIA x 30° included DE - AlTiN Coated
MICRO 100
$62.806.000 mm Shank DIA x 30° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RTCM-060-2X$62.80 -
6.000 mm Shank DIA x 30° included DE
MICRO 100
$49.206.000 mm Shank DIA x 30° included Carbide Tipped Engraver DEMIC100-RTCM-060-2$49.20 -
6.000 mm Shank DIA x 30° included - AlTiN Coated
MICRO 100
$44.906.000 mm Shank DIA x 30° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RTCM-060-1X$44.90 -
6.000 mm Shank DIA x 30° included
MICRO 100
$36.206.000 mm Shank DIA x 30° included Carbide Tipped EngraverMIC100-RTCM-060-1$36.20 -
4.000 mm Shank DIA x 30° included DE
MICRO 100
$39.954.000 mm Shank DIA x 30° included Carbide Tipped Engraver DEMIC100-RTCM-040-2$39.95 -
0.3750" (3/8) Shank DIA x 90° included DE
MICRO 100
$155.350.3750" (3/8) Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNC-375-24$155.35 -
0.3750" (3/8) Shank DIA x 90° included
MICRO 100
$94.850.3750" (3/8) Shank DIA x 90° included Carbide Tipped EngraverMIC100-RNC-375-1$94.85 -
0.3125" (5/16) Shank DIA x 90° included DE
MICRO 100
$123.050.3125" (5/16) Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNC-312-24$123.05 -
0.2500" (1/4) Shank DIA x 90° included DE - AlTiN Coated
MICRO 100
$74.350.2500" (1/4) Shank DIA x 90° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RNC-250-2X$74.35 -
0.2500" (1/4) Shank DIA x 90° included DE
MICRO 100
$68.050.2500" (1/4) Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNC-250-260$68.05 -
0.2500" (1/4) Shank DIA x 90° included - AlTiN Coated
MICRO 100
$73.400.2500" (1/4) Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedMIC100-RNC-250-14X$73.40 -
0.2500" (1/4) Shank DIA x 90° included
MICRO 100
$54.550.2500" (1/4) Shank DIA x 90° included Carbide Tipped EngraverMIC100-RNC-250-145$54.55 -
0.1875" (3/16) Shank DIA x 90° included DE - AlTiN Coated
MICRO 100
$56.200.1875" (3/16) Shank DIA x 90° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RNC-187-2X$56.20 -
0.1875" (3/16) Shank DIA x 90° included DE
MICRO 100
$49.300.1875" (3/16) Shank DIA x 90° included Carbide Tipped Engraver DEMIC100-RNC-187-2$49.30