GENERAL PURPOSE END MILLS - CARBIDE
Shop by category
-
2 Flute-Ball-30° Helix
-
2 Flute-Ball-30° Helix-NC Tolerance
-
2 Flute-Corner Radius-30° Helix
-
2 Flute-Square-30° Helix
-
2 Flute-Square-30° Helix-NC Tolerance
-
2 Flute-Square-Straight Flute
-
3 Flute-Ball-30° Helix
-
3 Flute-Corner Radius-30° Helix
-
3 Flute-Corner Radius-45° Helix
-
3 Flute-Corner Radius-60° Helix
-
3 Flute-Square-30° Helix
-
3 Flute-Square-45° Helix
-
3 Flute-Square-60° Helix
-
4 Flute-Ball-30° Helix
-
4 Flute-Ball-30° Helix-Double-Ended
-
4 Flute-Ball-30° Helix-Metric
-
4 Flute-Ball-30° Helix-NC Tolerance
-
4 Flute-Corner Radius-30° Helix
-
4 Flute-Square-30° Helix
-
4 Flute-Square-30° Helix-Double-Ended
-
4 Flute-Square-30° Helix-Metric
-
4 Flute-Square-30° Helix-NC Tolerance
-
4 Flute-Square-Straight Flute
-
5 Flute-Corner Radius-45° Helix
-
5 Flute-Square-45° Helix
-
4 Flute-Square-30° Helix-Long Reach
-
4 Flute-Ball-30° Helix-Long Reach
All products in this category
-
3 FL - 0.2500" (1/4) Cutter DIA x 0.7500" (3/4) LOC - Uncoated, TC30516
TITAN USA
Now: $27.05Was: $30.050.2500" (1/4) CUTTER DIA X 0.7500" (3/4) LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES, UNCOATEDTITUS1-TC30516Now: $27.05Was: $30.05 -
3 FL - 0.1875" (3/16) Cutter DIA x 0.6250" (5/8) LOC - Uncoated, TC30512
TITAN USA
Now: $25.29Was: $28.100.1875" (3/16) CUTTER DIA X 0.6250" (5/8) LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES, UNCOATEDTITUS1-TC30512Now: $25.29Was: $28.10 -
3 FL - 0.1250" (1/8) Cutter DIA x 0.5000" (1/2) LOC - Uncoated, TC30508
TITAN USA
Now: $21.02Was: $23.350.1250" (1/8) CUTTER DIA X 0.5000" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES, UNCOATEDTITUS1-TC30508Now: $21.02Was: $23.35 -
3 FL - 0.7500" (3/4) Cutter DIA x 0.0400" Radius x 1.6250" (1-5/8) LOC - Uncoated
TITAN USA
Now: $275.81Was: $306.450.7500" (3/4) CUTTER DIA X 0.0400" RADIUS X 1.6250" (1-5/8) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC40748Now: $275.81Was: $306.45 -
4 FL - 0.3750" (3/8) Cutter DIA x 2.2500" (2-1/4) LOC - AlTiN Coated
TITAN USA
Now: $64.04Was: $71.150.3750" (3/8) CUTTER DIA X 2.2500" (2-1/4) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATEDTITUS1-TC17626Now: $64.04Was: $71.15 -
4 FL - 0.3125" (5/16) Cutter DIA x 2.0000" (2) LOC - AlTiN Coated
TITAN USA
Now: $54.86Was: $60.950.3125" (5/16) CUTTER DIA X 2.0000" (2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATEDTITUS1-TC17621Now: $54.86Was: $60.95 -
4 FL - 0.2500" (1/4) Cutter DIA x 2.0000" (2) LOC - AlTiN Coated
TITAN USA
Now: $43.65Was: $48.500.2500" (1/4) CUTTER DIA X 2.0000" (2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATEDTITUS1-TC17618Now: $43.65Was: $48.50 -
4 FL - 0.1875" (3/16) Cutter DIA x 1.5000" (1-1/2) LOC - AlTiN Coated
TITAN USA
Now: $30.92Was: $34.350.1875" (3/16) CUTTER DIA X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATEDTITUS1-TC17613Now: $30.92Was: $34.35 -
4 FL - 0.3750" (3/8) Cutter DIA x 2.2500" (2-1/4) LOC - Uncoated
TITAN USA
Now: $51.12Was: $56.800.3750" (3/8) CUTTER DIA X 2.2500" (2-1/4) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, UNCOATEDTITUS1-TC17526Now: $51.12Was: $56.80 -
4 FL - 0.3125" (5/16) Cutter DIA x 2.0000" (2) LOC - Uncoated
TITAN USA
Now: $43.97Was: $48.850.3125" (5/16) CUTTER DIA X 2.0000" (2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, UNCOATEDTITUS1-TC17521Now: $43.97Was: $48.85 -
4 FL - 0.2500" (1/4) Cutter DIA x 2.0000" (2) LOC - Uncoated
TITAN USA
Now: $34.65Was: $38.500.2500" (1/4) CUTTER DIA X 2.0000" (2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, UNCOATEDTITUS1-TC17518Now: $34.65Was: $38.50 -
4 FL - 0.1875" (3/16) Cutter DIA x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $23.85Was: $26.500.1875" (3/16) CUTTER DIA X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, UNCOATEDTITUS1-TC17513Now: $23.85Was: $26.50 -
4 FL - 0.1250" (1/8) Cutter DIA x 1.2500" (1-1/4) LOC - Uncoated
TITAN USA
Now: $22.05Was: $24.500.1250" (1/8) CUTTER DIA X 1.2500" (1-1/4) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, UNCOATEDTITUS1-TC17509Now: $22.05Was: $24.50 -
3 FL - 0.2500" (1/4) Cutter DIA x 0.0600" Radius x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $40.01Was: $44.450.2500" (1/4) CUTTER DIA X 0.0600" RADIUS X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15915Now: $40.01Was: $44.45 -
3 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $40.01Was: $44.450.2500" (1/4) CUTTER DIA X 0.0300" RADIUS X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15914Now: $40.01Was: $44.45 -
3 FL - 0.2500" (1/4) Cutter DIA x 0.0200" Radius x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $40.01Was: $44.450.2500" (1/4) CUTTER DIA X 0.0200" RADIUS X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15913Now: $40.01Was: $44.45 -
3 FL - 0.2500" (1/4) Cutter DIA x 0.0150" (1/64) Radius x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $40.01Was: $44.450.2500" (1/4) CUTTER DIA X 0.0150" (1/64) RADIUS X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15912Now: $40.01Was: $44.45 -
3 FL - 0.2500" (1/4) Cutter DIA x 0.0100" Radius x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $40.01Was: $44.450.2500" (1/4) CUTTER DIA X 0.0100" RADIUS X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15911Now: $40.01Was: $44.45 -
3 FL - 0.2500" (1/4) Cutter DIA x 0.0050" Radius x 1.5000" (1-1/2) LOC - Uncoated
TITAN USA
Now: $40.01Was: $44.450.2500" (1/4) CUTTER DIA X 0.0050" RADIUS X 1.5000" (1-1/2) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15910Now: $40.01Was: $44.45 -
3 FL - 0.5000" (1/2) Cutter DIA x 0.0100" Radius x 1.0000" (1) LOC - Uncoated
TITAN USA
Now: $86.00Was: $95.550.5000" (1/2) CUTTER DIA X 0.0100" RADIUS X 1.0000" (1) LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES, UNCOATEDTITUS1-TC15729Now: $86.00Was: $95.55