Feed Mills - Combination Feed & HEM 4 Flute - Chip
-
4 FL - Feed Mill - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - TPLUS Coated
HELICAL
$415.300.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-030-40750)HELSO1-84488$415.30 -
4 FL - Feed Mill - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - TPLUS Coated
HELICAL
$396.900.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-021-40750)HELSO1-84487$396.90 -
4 FL - Feed Mill - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - TPLUS Coated
HELICAL
$384.200.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-013-40750)HELSO1-84486$384.20 -
4 FL - Feed Mill - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0500" Radius x 2.1250" (2-1/8) LOC x 4.0000" (4) OAL - TPLUS Coated
HELICAL
$297.700.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0500" Radius x 2.1250" (2-1/8) Length of Cut x 4.0000" (4) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-034-40625)HELSO1-84485$297.70 -
4 FL - Feed Mill - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0500" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
HELICAL
$282.600.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0500" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-026-40625)HELSO1-84484$282.60 -
4 FL - Feed Mill - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0500" Radius x 1.2500" (1-1/4) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
HELICAL
$263.700.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0500" Radius x 1.2500" (1-1/4) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-020-40625)HELSO1-84483$263.70 -
4 FL - Feed Mill - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - TPLUS Coated
HELICAL
$177.900.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-032-40500)HELSO1-84482$177.90 -
4 FL - Feed Mill - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - TPLUS Coated
HELICAL
$150.800.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-025-40500)HELSO1-84481$150.80 -
4 FL - Feed Mill - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - TPLUS Coated
HELICAL
$146.500.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-020-40500)HELSO1-84480$146.50 -
4 FL - Feed Mill - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - TPLUS Coated
HELICAL
$103.100.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-033-40375)HELSO1-84479$103.10 -
4 FL - Feed Mill - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - TPLUS Coated
HELICAL
$95.500.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-026-40375)HELSO1-84478$95.50 -
4 FL - Feed Mill - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.5000" (1/2) LOC x 2.0000" (2) OAL - TPLUS Coated
HELICAL
$87.000.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut x 2.0000" (2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-013-40375)HELSO1-84477$87.00 -
4 FL - Feed Mill - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - TPLUS Coated
HELICAL
$65.000.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-030-40250)HELSO1-84476$65.00 -
4 FL - Feed Mill - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - TPLUS Coated
HELICAL
$62.400.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-020-40250)HELSO1-84475$62.40 -
4 FL - Feed Mill - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - TPLUS Coated
HELICAL
$58.100.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-015-40250)HELSO1-84474$58.10 -
4 FL - Feed Mill - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.5625" (9/16) LOC x 2.5000" (2-1/2) OAL - TPLUS Coated
HELICAL
$49.400.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.5625" (9/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-030-40187)HELSO1-84473$49.40 -
4 FL - Feed Mill - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - TPLUS Coated
HELICAL
$47.900.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-023-40187)HELSO1-84472$47.90 -
4 FL - Feed Mill - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.3125" (5/16) LOC x 2.0000" (2) OAL - TPLUS Coated
HELICAL
$46.900.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-016-40187)HELSO1-84471$46.90 -
4 FL - Feed Mill - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - TPLUS Coated
HELICAL
$42.200.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-040-40125)HELSO1-84470$42.20 -
4 FL - Feed Mill - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) LOC x 1.5000" (1-1/2) OAL - TPLUS Coated
HELICAL
$41.400.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Combination Feed & HEM End Mill, 4 Flutes, TPLUS Coated - (HEVF-C-020-40125)HELSO1-84468$41.40