HELICAL
5 FL - Square - 0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) LOC x 2.5000" (2-1/2) OAL - NPLUS Coated
- SKU:
- HELSO1-88974
- MPN:
- 88974
- Shipping:
- Calculated at Checkout
Description
0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, NPLUS Coated - (HVAL-020-50187)
View AllClose
Additional Information
Cutter Diameter: |
0.1875" (3/16) |
Length of Cut: |
0.3750" (3/8) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
5 |
LOC Multiple: |
(2x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Shank Length: |
2.2190" |
Coating: |
NPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
5 FL - Square - 0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) LOC x 2.5000" (2-1/2) OAL - NPLUS Coated
HELICAL
$29.45
0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, NPLUS Coated - (HVAL-030-50125)
HELSO1-88970
5 FL - Square - 0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - NPLUS Coated
HELICAL
$36.95
0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, NPLUS Coated - (HVAL-040-50187)
HELSO1-88976
5 FL - Square - 0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - NPLUS Coated
HELICAL
$37.65
0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, NPLUS Coated - (HVAL-053-50187)
HELSO1-88978
5 FL - Square - 0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$26.60
0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-020-50187)
HELSO1-88973
5 FL - Square - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - NPLUS Coated
HELICAL
$66.65
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, NPLUS Coated - (HVAL-020-50375)
HELSO1-88986