HELICAL
6 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 6.0000" (6) OAL x 2.3750" (2-3/8) Reach - APLUS Coated
- SKU:
- HELSO1-88599
- MPN:
- 88599
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 6.0000" (6) Overall Length x 2.3750" (2-3/8) Reach Carbide Square End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-RN-R-60625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Neck Diameter: |
0.5930" (19/32) |
Length of Cut: |
0.7500" (3/4) |
Overall Reach: |
2.3750" (2-3/8) |
Overall Length: |
6.0000" (6) |
Flutes: |
6 |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
3.6250" (3-5/8) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 6.0000" (6) OAL x 2.3750" (2-3/8) Reach - APLUS Coated
HELICAL
$246.70
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 6.0000" (6) Overall Length x 2.3750" (2-3/8) Reach Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated -...
HELSO1-50317
4 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 6.0000" (6) OAL x 2.3750" (2-3/8) Reach - APLUS Coated
HELICAL
$244.00
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 6.0000" (6) Overall Length x 2.3750" (2-3/8) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-52287
6 FL - Ball - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 6.0000" (6) OAL x 2.3750" (2-3/8) Reach - APLUS Coated
HELICAL
$273.50
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 6.0000" (6) Overall Length x 2.3750" (2-3/8) Reach Carbide Ball End Mill for Steel, 6 Flutes, APLUS Coated -...
HELSO1-88607
4 FL - Ball - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 6.0000" (6) OAL x 2.3750" (2-3/8) Reach - APLUS Coated
HELICAL
$262.30
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 6.0000" (6) Overall Length x 2.3750" (2-3/8) Reach Carbide Ball End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-57287
6 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 6.0000" (6) OAL x 2.3750" (2-3/8) Reach - TPLUS Coated
HELICAL
$282.60
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 6.0000" (6) Overall Length x 2.3750" (2-3/8) Reach Carbide Square End Mill for Stainless and High Temp, 6 Flutes,...
HELSO1-88640