HELICAL
6 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - APLUS Coated
- SKU:
- HELSO1-88598
- MPN:
- 88598
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide Square End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-RN-S-60625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Neck Diameter: |
0.5930" (19/32) |
Length of Cut: |
0.7500" (3/4) |
Overall Reach: |
1.6250" (1-5/8) |
Overall Length: |
4.0000" (4) |
Flutes: |
6 |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
2.3750" (2-3/8) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - APLUS Coated
HELICAL
$181.20
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-52272
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - APLUS Coated, 50302
HELICAL
$183.20
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated -...
HELSO1-50302
6 FL - Ball - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - APLUS Coated
HELICAL
$208.90
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide Ball End Mill for Steel, 6 Flutes, APLUS Coated -...
HELSO1-88606
3 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - APLUS Coated
HELICAL
$150.00
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide Square End Mill for Steel, 3 Flutes, APLUS Coated - (HSV-R-30625)
HELSO1-23260
4 FL - Ball - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - APLUS Coated
HELICAL
$199.50
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide Ball End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-57272