HELICAL
6 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 2.7500" (2-3/4) Reach - APLUS Coated
- SKU:
- HELSO1-88597
- MPN:
- 88597
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 2.7500" (2-3/4) Reach Carbide Square End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-RN-A-60500)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Neck Diameter: |
0.4750" |
Length of Cut: |
0.6250" (5/8) |
Overall Reach: |
2.7500" (2-3/4) |
Overall Length: |
6.0000" (6) |
Flutes: |
6 |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Shank Length: |
3.2500" (3-1/4) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
6 FL - Ball - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 2.7500" (2-3/4) Reach - APLUS Coated
HELICAL
$162.40
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 2.7500" (2-3/4) Reach Carbide Ball End Mill for Steel, 6 Flutes, APLUS Coated -...
HELSO1-88605
6 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 2.7500" (2-3/4) Reach - APLUS Coated
HELICAL
$159.50
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 2.7500" (2-3/4) Reach Carbide Corner Radius End Mill for Steel, 6...
HELSO1-88625
4 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 3.7500" (3-3/4) Reach - APLUS Coated
HELICAL
$165.70
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 3.7500" (3-3/4) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-83500
5 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.1250" (4-1/8) Reach - APLUS Coated
HELICAL
$174.90
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.1250" (4-1/8) Reach Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated -...
HELSO1-50287
4 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.1250" (4-1/8) Reach - APLUS Coated
HELICAL
$168.40
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.1250" (4-1/8) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-52257