HELICAL
5 FL - Square - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.5000" (1-1/2) Reach - APLUS Coated
- SKU:
- HELSO1-86372
- MPN:
- 86372
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.5000" (1-1/2) Reach Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-RN-X-50125)
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Neck Diameter: |
0.1180" (3 mm) |
Length of Cut: |
0.1562" (5/32) |
Overall Reach: |
1.5000" (1-1/2) |
Overall Length: |
3.0000" (3) |
Flutes: |
5 |
LOC Multiple: |
(1.2x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Shank Length: |
1.5000" (1-1/2) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Square - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 0.6250" (5/8) Reach - APLUS Coated
HELICAL
$29.90
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 0.6250" (5/8) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-52047
4 FL - Square - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.0000" (1) Reach - APLUS Coated
HELICAL
$32.60
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.0000" (1) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-83497
3 FL - Ball - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 0.5000" (1/2) Reach - APLUS Coated
HELICAL
$36.80
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 0.5000" (1/2) Reach Carbide Ball End Mill for Steel, 3 Flutes, APLUS Coated -...
HELSO1-13032
5 FL - Corner Radius - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.5000" (1-1/2) Reach - APLUS Coated
HELICAL
$42.00
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.5000" (1-1/2) Reach Carbide Corner Radius End Mill for Steel, 5...
HELSO1-88576
5 FL - Corner Radius - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.5000" (1-1/2) Reach - APLUS Coated
HELICAL
$42.00
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.5000" (1-1/2) Reach Carbide Corner Radius End Mill for Steel, 5...
HELSO1-88577