HELICAL
2 FL - Ball - 45¡ Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - Uncoated
- SKU:
- HELSO1-17570
- MPN:
- 17570
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45¡ Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-R-20625-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
1.6250" (1-5/8) |
Overall Length: |
3.5000" (3-1/2) |
Flutes: |
2 |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$114.30
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-R-20625)
HELSO1-00570
3 FL - Ball - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$127.70
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89242
3 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$116.50
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-R-30625)
HELSO1-03570
2 FL - Ball - 45¡ Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated
HELICAL
$143.25
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45¡ Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-17572
3 FL - Square - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$111.70
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-R-30625)
HELSO1-01570