Undercutting End Mills-220°
-
2.000 mm Cutter DIA x 16.00 mm Neck Length x 220° Wrap Angle - 3 FL
MICRO 100
$131.052.000 mm Cutter DIA x 16.00 mm Neck Length x 220° Carbide Undercutting End Mill, 3 FlutesMIC100-SBMM-020-316$131.05 -
2.000 mm Cutter DIA x 10.00 mm Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$138.652.000 mm Cutter DIA x 10.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedMIC100-SBMM-020-210X$138.65 -
2.000 mm Cutter DIA x 6.00 mm Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$138.652.000 mm Cutter DIA x 6.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedMIC100-SBMM-020-206X$138.65 -
0.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$263.350.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBM-500-4$263.35 -
0.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$263.350.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesMIC100-SBM-500-2$263.35 -
0.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$225.100.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBM-375-4X$225.10 -
0.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$211.750.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBM-375-4$211.75 -
0.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$138.650.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBM-250-4X$138.65 -
0.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$131.050.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBM-250-4$131.05 -
0.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Wrap Angle - 3 FL - AlTiN Coated
MICRO 100
$138.650.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Carbide Undercutting End Mill, 3 Flutes, AlTiN CoatedMIC100-SBM-250-3X$138.65 -
0.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Wrap Angle - 3 FL
MICRO 100
$131.050.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Carbide Undercutting End Mill, 3 FlutesMIC100-SBM-250-3$131.05 -
0.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$138.650.2500" (1/4) Cutter DIA x 0.500" (1/2) Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedMIC100-SBM-250-2X$138.65 -
0.1875" (3/16) Cutter DIA x 0.350" Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$138.650.1875" (3/16) Cutter DIA x 0.350" Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBM-187-4X$138.65 -
0.1875" (3/16) Cutter DIA x 0.350" Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$131.050.1875" (3/16) Cutter DIA x 0.350" Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBM-187-4$131.05 -
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$138.650.1250" (1/8) Cutter DIA x 0.250" (1/4) Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBM-125-4X$138.65 -
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$131.050.1250" (1/8) Cutter DIA x 0.250" (1/4) Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBM-125-4$131.05 -
10.000 mm Cutter DIA x 30.00 mm Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$222.1510.000 mm Cutter DIA x 30.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesMIC100-SBMM-100-230$222.15 -
8.000 mm Cutter DIA x 55.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$178.308.000 mm Cutter DIA x 55.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-080-464X$178.30 -
8.000 mm Cutter DIA x 40.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$178.308.000 mm Cutter DIA x 40.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-080-440X$178.30 -
8.000 mm Cutter DIA x 24.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$178.308.000 mm Cutter DIA x 24.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-080-424X$178.30