HELICAL
Shop by category
-
ALUMINUM & NON-FERROUS MATERIALS
-
COOLANT THROUGH TOOLS
-
HARDENED STEELS
-
HIGH EFFICIENCY MILLING (HEM)
-
HIGH FEED END MILLS
-
METRIC TOOLING
-
MULTI-AXIS FINISHERS
-
REDUCED NECK END MILLS
-
STAINLESS STEELS & HIGH TEMP ALLOYS
-
STEELS, TOOL STEELS & CAST IRON
-
TITANIUM & TITANIUM ALLOYS
-
NICKEL ALLOYS
-
SPECIALTY PROFILES
-
5 FL - Feed Mill - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 0.5000" (1/2) LOC x 5.0000" (5) OAL x 2.0000" (2) Reach - TPLUS Coated, 82703
HELICAL
$454.900.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 0.5000" (1/2) Length of Cut x 5.0000" (5) Overall Length x 2.0000" (2) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-040-50500)HELSO1-82703$454.90 -
5 FL - Feed Mill - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 0.5000" (1/2) LOC x 5.0000" (5) OAL x 1.0000" (1) Reach - TPLUS Coated, 82702
HELICAL
$446.300.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0400" Radius x 0.5000" (1/2) Length of Cut x 5.0000" (5) Overall Length x 1.0000" (1) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-020-50500)HELSO1-82702$446.30 -
5 FL - Feed Mill - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) LOC x 4.0000" (4) OAL x 2.2500" (2-1/4) Reach - TPLUS Coated, 82701
HELICAL
$264.900.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut x 4.0000" (4) Overall Length x 2.2500" (2-1/4) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-060-50375)HELSO1-82701$264.90 -
5 FL - Feed Mill - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) LOC x 4.0000" (4) OAL x 1.5000" (1-1/2) Reach - TPLUS Coated, 82700
HELICAL
$264.900.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut x 4.0000" (4) Overall Length x 1.5000" (1-1/2) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-040-50375)HELSO1-82700$264.90 -
5 FL - Feed Mill - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) LOC x 4.0000" (4) OAL x 0.7500" (3/4) Reach - TPLUS Coated, 82699
HELICAL
$263.400.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut x 4.0000" (4) Overall Length x 0.7500" (3/4) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-020-50375)HELSO1-82699$263.40 -
5 FL - Feed Mill - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.2500" (1/4) LOC x 3.0000" (3) OAL x 1.5000" (1-1/2) Reach - TPLUS Coated, 82698
HELICAL
$168.700.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut x 3.0000" (3) Overall Length x 1.5000" (1-1/2) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-060-50250)HELSO1-82698$168.70 -
5 FL - Feed Mill - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.2500" (1/4) LOC x 3.0000" (3) OAL x 1.0000" (1) Reach - TPLUS Coated, 82697
HELICAL
$168.700.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut x 3.0000" (3) Overall Length x 1.0000" (1) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-040-50250)HELSO1-82697$168.70 -
5 FL - Feed Mill - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.2500" (1/4) LOC x 3.0000" (3) OAL x 0.5000" (1/2) Reach - TPLUS Coated, 82696
HELICAL
$167.800.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut x 3.0000" (3) Overall Length x 0.5000" (1/2) Reach Carbide Coolant Through High Feed End Mill, 5 Flutes, TPLUS Coated - (HFVC-RN-020-50250)HELSO1-82696$167.80 -
5 FL - Feed Mill - 12.000 mm Cutter DIA x 12.000 mm Shank DIA x 0.960 mm Radius x 12.000 mm LOC x 125.000 mm OAL x 48.000 mm Reach - TPLUS Coated, 82694
HELICAL
$335.1012.000 mm Cutter DIA x 12.000 mm Shank DIA x 0.960 mm Radius x 12.000 mm Length of Cut x 125.000 mm Overall Length x 48.000 mm Reach Carbide High Feed End Mill, 5 Flutes, TPLUS Coated - (MHFV-RN-040-51200)HELSO1-82694$335.10 -
7 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - APLUS Coated, 82661
HELICAL
$474.500.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide Corner Radius End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-LX-70750-R.030)HELSO1-82661$474.50 -
7 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 2.7500" (2-3/4) LOC x 5.0000" (5) OAL - APLUS Coated, 82660
HELICAL
$406.600.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 2.7500" (2-3/4) Length of Cut x 5.0000" (5) Overall Length Carbide Corner Radius End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-L-70750-R.030)HELSO1-82660$406.60 -
7 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - APLUS Coated, 82658
HELICAL
$186.500.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide Corner Radius End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-X-70500-R.030)HELSO1-82658$186.50 -
7 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - APLUS Coated, 82652
HELICAL
$160.500.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-LX-70500)HELSO1-82652$160.50 -
7 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - APLUS Coated, 82648
HELICAL
$48.700.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-S-70312)HELSO1-82648$48.70 -
7 FL - Square - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated, 82647
HELICAL
$64.900.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-L-70250)HELSO1-82647$64.90 -
6 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - APLUS Coated, 82585
HELICAL
$204.200.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide Corner Radius End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-LX-60500-R.060)HELSO1-82585$204.20 -
6 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - APLUS Coated, 82584
HELICAL
$204.000.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide Corner Radius End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-LX-60500-R.030)HELSO1-82584$204.00 -
6 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated, 82583
HELICAL
$146.000.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-R-60500-R.020)HELSO1-82583$146.00 -
6 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - APLUS Coated, 82582
HELICAL
$141.600.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-SR-60500-R.020)HELSO1-82582$141.60 -
6 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated, 82579
HELICAL
$146.000.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-R-60500-R.010)HELSO1-82579$146.00