Square - Variable Pitch (Tplus)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1875" (3/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1094" (7/64) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5625" (9/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1094" (7/64) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.0938" Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.0938" Cutter DIA x 0.2500" (1/4) Shank DIA x 0.1875" (3/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3125" (5/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.1875" (3/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.0625" (1/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.2500" (1/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.0625" (1/16) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.1250" (1/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...

0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-M-50750)

0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-R-50750)

0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-R-50625)

0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-S-50625)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-R-50500)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-SR-50500)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-S-50500)

0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-R-50375)

0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 2.0000" (2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated - (HEV-S-50375)