GENERAL PURPOSE END MILLS - CARBIDE
Shop by category
-
2 Flute-Ball-30° Helix
-
2 Flute-Ball-30° Helix-NC Tolerance
-
2 Flute-Corner Radius-30° Helix
-
2 Flute-Square-30° Helix
-
2 Flute-Square-30° Helix-NC Tolerance
-
2 Flute-Square-Straight Flute
-
3 Flute-Ball-30° Helix
-
3 Flute-Corner Radius-30° Helix
-
3 Flute-Corner Radius-45° Helix
-
3 Flute-Corner Radius-60° Helix
-
3 Flute-Square-30° Helix
-
3 Flute-Square-45° Helix
-
3 Flute-Square-60° Helix
-
4 Flute-Ball-30° Helix
-
4 Flute-Ball-30° Helix-Double-Ended
-
4 Flute-Ball-30° Helix-Metric
-
4 Flute-Ball-30° Helix-NC Tolerance
-
4 Flute-Corner Radius-30° Helix
-
4 Flute-Square-30° Helix
-
4 Flute-Square-30° Helix-Double-Ended
-
4 Flute-Square-30° Helix-Metric
-
4 Flute-Square-30° Helix-NC Tolerance
-
4 Flute-Square-Straight Flute
-
5 Flute-Corner Radius-45° Helix
-
5 Flute-Square-45° Helix
-
4 Flute-Square-30° Helix-Long Reach
-
4 Flute-Ball-30° Helix-Long Reach
All products in this category
-
0.0313" Cutter DIA x 0.0625" (1/16) Length of Cut Carbide Ball End Mill, 3 Flutes, AlTiN Coated
TITAN USA
Now: $23.22Was: $25.800.0313" Cutter DIA x 0.0625" (1/16) Length of Cut Carbide Ball End Mill, 3 Flutes, AlTiN CoatedTITUS1-TC12302Now: $23.22Was: $25.80 -
0.0156" (1/64) Cutter DIA x 0.0230" Length of Cut Carbide Ball End Mill, 3 Flutes, AlTiN Coated
TITAN USA
Now: $33.03Was: $36.700.0156" (1/64) Cutter DIA x 0.0230" Length of Cut Carbide Ball End Mill, 3 Flutes, AlTiN CoatedTITUS1-TC12301Now: $33.03Was: $36.70 -
1.0000" (1) Cutter DIA x 1.2500" (1-1/4) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $348.98Was: $387.751.0000" (1) Cutter DIA x 1.2500" (1-1/4) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12264Now: $348.98Was: $387.75 -
0.7500" (3/4) Cutter DIA x 1.0000" (1) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $211.91Was: $235.450.7500" (3/4) Cutter DIA x 1.0000" (1) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12248Now: $211.91Was: $235.45 -
0.6250" (5/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $138.78Was: $154.200.6250" (5/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12240Now: $138.78Was: $154.20 -
0.5000" (1/2) Cutter DIA x 0.6250" (5/8) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $67.68Was: $75.200.5000" (1/2) Cutter DIA x 0.6250" (5/8) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12232Now: $67.68Was: $75.20 -
0.4375" (7/16) Cutter DIA x 0.6250" (5/8) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $49.86Was: $55.400.4375" (7/16) Cutter DIA x 0.6250" (5/8) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12228Now: $49.86Was: $55.40 -
0.3750" (3/8) Cutter DIA x 0.6250" (5/8) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $39.83Was: $44.250.3750" (3/8) Cutter DIA x 0.6250" (5/8) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12224Now: $39.83Was: $44.25 -
0.3125" (5/16) Cutter DIA x 0.5000" (1/2) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $30.83Was: $34.250.3125" (5/16) Cutter DIA x 0.5000" (1/2) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12220Now: $30.83Was: $34.25 -
0.2500" (1/4) Cutter DIA x 0.5000" (1/2) Length of Cut Carbide Ball End Mill, 3 Flutes, Uncoated
TITAN USA
Now: $24.80Was: $27.550.2500" (1/4) Cutter DIA x 0.5000" (1/2) Length of Cut Carbide Ball End Mill, 3 Flutes, UncoatedTITUS1-TC12216Now: $24.80Was: $27.55 -
5 FL - 0.3750" (3/8) Cutter DIA x 0.0300" Radius x 0.6250" (5/8) LOC - AlTiN Coated
TITAN USA
Now: $59.58Was: $66.200.3750" (3/8) Cutter DIA x 0.0300" Radius x 0.6250" (5/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61725Now: $59.58Was: $66.20 -
5 FL - 0.3750" (3/8) Cutter DIA x 0.0100" Radius x 0.6250" (5/8) LOC - AlTiN Coated
TITAN USA
Now: $59.58Was: $66.200.3750" (3/8) Cutter DIA x 0.0100" Radius x 0.6250" (5/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61722Now: $59.58Was: $66.20 -
5 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - AlTiN Coated
TITAN USA
Now: $38.75Was: $43.050.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61721Now: $38.75Was: $43.05 -
5 FL - 0.3125" (5/16) Cutter DIA x 0.0100" Radius x 0.5000" (1/2) LOC - AlTiN Coated
TITAN USA
Now: $38.75Was: $43.050.3125" (5/16) Cutter DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61718Now: $38.75Was: $43.05 -
5 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - AlTiN Coated
TITAN USA
Now: $32.31Was: $35.900.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61717Now: $32.31Was: $35.90 -
5 FL - 0.2500" (1/4) Cutter DIA x 0.0100" Radius x 0.5000" (1/2) LOC - AlTiN Coated
TITAN USA
Now: $32.31Was: $35.900.2500" (1/4) Cutter DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61715Now: $32.31Was: $35.90 -
5 FL - 0.1875" (3/16) Cutter DIA x 0.0300" Radius x 0.3750" (3/8) LOC - AlTiN Coated
TITAN USA
Now: $26.91Was: $29.900.1875" (3/16) Cutter DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61714Now: $26.91Was: $29.90 -
5 FL - 0.1875" (3/16) Cutter DIA x 0.0200" Radius x 0.3750" (3/8) LOC - AlTiN Coated
TITAN USA
Now: $26.91Was: $29.900.1875" (3/16) Cutter DIA x 0.0200" Radius x 0.3750" (3/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61713Now: $26.91Was: $29.90 -
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.2500" (1/4) LOC - AlTiN Coated
TITAN USA
Now: $19.13Was: $21.250.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61710Now: $19.13Was: $21.25 -
5 FL - 0.1250" (1/8) Cutter DIA x 0.0200" Radius x 0.2500" (1/4) LOC - AlTiN Coated
TITAN USA
Now: $19.13Was: $21.250.1250" (1/8) Cutter DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN CoatedTITUS1-TC61709Now: $19.13Was: $21.25