DRILL STYLE
Shop by category
All products in this category
-
0.0700" Cutter DIA x 0.2190" LOC x 90° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0700" CUTTER DIA X 0.2190" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-46577-C3$64.61 -
0.0700" Cutter DIA x 0.2190" LOC x 90° included - 2 FL
HARVEY TOOL
$58.100.0700" CUTTER DIA X 0.2190" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-46577$58.10 -
0.0550" (1.4 mm) Cutter DIA x 0.1560" (5/32) LOC x 90° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0550" (1.4 MM) CUTTER DIA X 0.1560" (5/32) LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-46574-C3$64.61 -
0.0550" (1.4 mm) Cutter DIA x 0.1560" (5/32) LOC x 90° included - 2 FL
HARVEY TOOL
$58.100.0550" (1.4 MM) CUTTER DIA X 0.1560" (5/32) LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-46574$58.10 -
0.0400" Cutter DIA x 0.1250" (1/8) LOC x 90° included - 2 FL - AlTiN Coated, 46571-C3
HARVEY TOOL
$64.610.0400" CUTTER DIA X 0.1250" (1/8) LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-46571-C3$64.61 -
0.0400" Cutter DIA x 0.1250" (1/8) LOC x 90° included - 2 FL, 46571
HARVEY TOOL
$58.100.0400" CUTTER DIA X 0.1250" (1/8) LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-46571$58.10 -
0.0250" Cutter DIA x 0.0780" (5/64) LOC x 90° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0250" CUTTER DIA X 0.0780" (5/64) LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-46568-C3$64.61 -
0.0250" Cutter DIA x 0.0780" (5/64) LOC x 90° included - 2 FL
HARVEY TOOL
$58.100.0250" CUTTER DIA X 0.0780" (5/64) LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-46568$58.10 -
0.0200" (.5 mm) Cutter DIA x 0.0630" LOC x 90° included - 2 FL - AlTiN Coated, 46567-C3
HARVEY TOOL
$64.610.0200" (.5 MM) CUTTER DIA X 0.0630" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-46567-C3$64.61 -
0.0200" (.5 mm) Cutter DIA x 0.0630" LOC x 90° included - 2 FL, 46567
HARVEY TOOL
$58.100.0200" (.5 MM) CUTTER DIA X 0.0630" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-46567$58.10 -
0.0400" Cutter DIA x 0.1250" (1/8) LOC x 120° included - 2 FL
HARVEY TOOL
$58.100.0400" CUTTER DIA X 0.1250" (1/8) LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-12971$58.10 -
0.0250" Cutter DIA x 0.0780" (5/64) LOC x 120° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0250" CUTTER DIA X 0.0780" (5/64) LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-12968-C3$64.61 -
0.0250" Cutter DIA x 0.0780" (5/64) LOC x 120° included - 2 FL
HARVEY TOOL
$58.100.0250" CUTTER DIA X 0.0780" (5/64) LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-12968$58.10 -
0.0200" (.5 mm) Cutter DIA x 0.0630" LOC x 120° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0200" (.5 MM) CUTTER DIA X 0.0630" LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-12967-C3$64.61 -
0.0200" (.5 mm) Cutter DIA x 0.0630" LOC x 120° included - 2 FL
HARVEY TOOL
$58.100.0200" (.5 MM) CUTTER DIA X 0.0630" LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-12967$58.10 -
0.0700" Cutter DIA x 0.2190" LOC x 120° included - 2 FL - AlTiN Coated
HARVEY TOOL
$60.010.0700" CUTTER DIA X 0.2190" LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-12977-C3$60.01 -
0.0700" Cutter DIA x 0.2190" LOC x 120° included - 2 FL
HARVEY TOOL
$53.500.0700" CUTTER DIA X 0.2190" LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-12977$53.50 -
0.0550" (1.4 mm) Cutter DIA x 0.1560" (5/32) LOC x 120° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0550" (1.4 MM) CUTTER DIA X 0.1560" (5/32) LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-12974-C3$64.61 -
0.0550" (1.4 mm) Cutter DIA x 0.1560" (5/32) LOC x 120° included - 2 FL
HARVEY TOOL
$58.100.0550" (1.4 MM) CUTTER DIA X 0.1560" (5/32) LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTESHARTO1-12974$58.10 -
0.0400" Cutter DIA x 0.1250" (1/8) LOC x 120° included - 2 FL - AlTiN Coated
HARVEY TOOL
$64.610.0400" CUTTER DIA X 0.1250" (1/8) LENGTH OF CUT X 120° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATEDHARTO1-12971-C3$64.61