HELICAL
3 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
- SKU:
- HELSO1-89198
- Shipping:
- Calculated at Checkout
Description
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-M-30187-BN)
View AllClose
Related Products
Related Products
3 FL - Ball - 40° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$34.20
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-49060
2 FL - Ball - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$35.75
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated -...
HELSO1-81319
3 FL - Ball - 40¡ Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL
HELICAL
$51.20
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40¡ Helix Ball End Mill for Aluminum, 3 Flutes - (H40ALV-R-30187-BN)
HELSO1-87819
3 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$45.60
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89199
3 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.5625" (9/16) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$29.80
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.5625" (9/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89196