REDUCED NECK END MILLS

0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 6.0000" (6) Overall Length x 3.1250" (3-1/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-RN-L-30375)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 6.0000" (6) Overall Length x 3.1250" (3-1/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-RN-L-30312)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-RN-M-30312)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 0.7500" (3/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-RN-M-30125)

0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 4.0000" (4) Overall Length x 0.7500" (3/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-RN-S-30250)

1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 5.0000" (5) Overall Length x 2.6250" (2-5/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-RN-R-31000)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 0.7500" (3/4) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-M-20125-BN)

0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 6.0000" (6) Overall Length x 3.3750" (3-3/8) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-L-20750-BN)

0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 6.0000" (6) Overall Length x 4.3750" (4-3/8) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-X-20750-BN)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 3.3750" (3-3/8) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-L-20500-BN)

0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 6.0000" (6) Overall Length x 2.5000" (2-1/2) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-M-20750-BN)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-X-20500-BN)

0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.3750" (3/8) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-A-20250)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 4.5000" (4-1/2) Overall Length x 2.7500" (2-3/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-ML-20500)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 4.5000" (4-1/2) Overall Length x 2.7500" (2-3/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-ML-20500)

0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 4.0000" (4) Overall Length x 1.7500" (1-3/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-A-20500)

0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-R-20625)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 6.0000" (6) Overall Length x 3.1250" (3-1/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-L-20312)

0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-RN-M-20375)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.0000" (1) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-L-20125-BN)