HELICAL
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
- SKU:
- HELSO1-88170
- MPN:
- 88170
- Shipping:
- Calculated at Checkout
Description
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 4 Flutes, TPLUS Coated - (HSV-M-40437)
View AllClose
Additional Information
Cutter Diameter: |
0.4375" (7/16) |
Length of Cut: |
1.1250" (1-1/8) |
Overall Length: |
3.5000" (3-1/2) |
Flutes: |
4 |
Shank Diameter: |
0.4375" (7/16) |
Metric: |
N |
Shank Length: |
2.3750" (2-3/8) |
Coating: |
TPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Ball - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
HELICAL
$113.50
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Ball End Mill for Stainless and High Temp, 4 Flutes, TPLUS Coated -...
HELSO1-84765
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
HELICAL
$104.45
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...
HELSO1-88255
5 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated
HELICAL
$86.50
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-M-50437)
HELSO1-88246
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated
HELICAL
$80.40
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.1250" (1-1/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-M-40437)
HELSO1-30437
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
HELICAL
$101.25
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 4 Flutes, TPLUS Coated -...
HELSO1-88171