HELICAL
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated
- SKU:
- HELSO1-44332
- MPN:
- 44332
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
1.6250" (1-5/8) |
Overall Length: |
3.5000" (3-1/2) |
Flutes: |
5 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated, 44332W
HELICAL
$177.15
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50625)
HELSO1-44332W
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated, 05622
HELICAL
$131.60
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEF-R-50625)
HELSO1-05622
4 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated
HELICAL
$154.20
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-R-40625)
HELSO1-30587
6 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - APLUS Coated
HELICAL
$194.50
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-R-60625)
HELSO1-59269
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - TPLUS Coated
HELICAL
$196.95
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...
HELSO1-59851