HELICAL
4 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated, 31257
- SKU:
- HELSO1-31257
- MPN:
- 31257
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-M-40312-R.020)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
1.2500" (1-1/4) |
Overall Length: |
3.0000" (3) |
Corner Radius: |
0.0200" |
Flutes: |
4 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.7500" (1-3/4) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated
HELICAL
$78.85
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-33257
5 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated
HELICAL
$64.40
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated -...
HELSO1-81743
3 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated
HELICAL
$58.30
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 3 Flutes, APLUS Coated -...
HELSO1-08192
4 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated, 31257W
HELICAL
$58.85
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-31257W
4 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - APLUS Coated, 33257W
HELICAL
$67.50
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide...
HELSO1-33257W