HELICAL
4 FL - Square - 0.4063" Cutter DIA x 0.4375" (7/16) Shank DIA x 0.9375" (15/16) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
- SKU:
- HELSO1-30377
- MPN:
- 30377
- Shipping:
- Calculated at Checkout
Description
0.4063" Cutter DIA x 0.4375" (7/16) Shank DIA x 0.9375" (15/16) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-R-40406)
View AllClose
Additional Information
Cutter Diameter: |
0.4063" |
Length of Cut: |
0.9375" (15/16) |
Overall Length: |
2.7500" (2-3/4) |
Flutes: |
4 |
LOC Multiple: |
(2.3x) |
Shank Diameter: |
0.4375" (7/16) |
Metric: |
N |
Shank Length: |
1.8125" (1-13/16) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
4 FL - Corner Radius - 0.4063" Cutter DIA x 0.4375" (7/16) Shank DIA x 0.0200" Radius x 0.9375" (15/16) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$73.85
0.4063" Cutter DIA x 0.4375" (7/16) Shank DIA x 0.0200" Radius x 0.9375" (15/16) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Corner Radius End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-31377
4 FL - Square - 0.4063" Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5000" (1/2) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$63.90
0.4063" Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5000" (1/2) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-S-40406)
HELSO1-30362
4 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$71.70
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.8750" (7/8) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-R-40437)
HELSO1-30422
7 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5625" (9/16) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$61.20
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 0.5625" (9/16) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HSF-S-70437)
HELSO1-24242
7 FL - Square - 0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.0000" (1) LOC x 2.7500" (2-3/4) OAL - APLUS Coated
HELICAL
$64.30
0.4375" (7/16) Cutter DIA x 0.4375" (7/16) Shank DIA x 1.0000" (1) Length of Cut x 2.7500" (2-3/4) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HSF-R-70437)
HELSO1-24257