HELICAL
7 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated
- SKU:
- HELSO1-24107
- MPN:
- 24107
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HSF-R-70312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
0.8125" (13/16) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
7 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.6875" (1-11/16) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
5 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated
HELICAL
$42.30
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50312)
HELSO1-44182
5 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated, 05217
HELICAL
$41.70
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEF-R-50312)
HELSO1-05217
5 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated, 44182W
HELICAL
$48.60
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50312)
HELSO1-44182W
3 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated
HELICAL
$38.60
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 3 Flutes, APLUS Coated - (HSV-R-30312)
HELSO1-23130
3 FL - Ball - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated
HELICAL
$52.10
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for Steel, 3 Flutes, APLUS Coated - (HST-R-30312-BN)
HELSO1-12182