HELICAL
3 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - APLUS Coated
- SKU:
- HELSO1-12062
- MPN:
- 12062
- Shipping:
- Calculated at Checkout
Description
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Ball End Mill for Steel, 3 Flutes, APLUS Coated - (HST-S-30187-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.1875" (3/16) |
Length of Cut: |
0.3125" (5/16) |
Overall Length: |
2.0000" (2) |
Flutes: |
3 |
LOC Multiple: |
(1.5x) |
Shank Diameter: |
0.1875" (3/16) |
Metric: |
N |
Shank Length: |
1.6875" (1-11/16) |
Coating: |
APLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
6 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - APLUS Coated
HELICAL
$33.40
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Ball End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-S-60187-BN)
HELSO1-84410
4 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - APLUS Coated
HELICAL
$32.40
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Ball End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-S-40187-BN)
HELSO1-56077
3 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - ZPLUS Coated
HELICAL
$34.90
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Ball End Mill for...
HELSO1-89193
7 FL - Square - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - APLUS Coated
HELICAL
$23.40
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-S-70187)
HELSO1-84418
3 FL - Square - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - APLUS Coated
HELICAL
$21.30
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide Square End Mill for Steel, 3 Flutes, APLUS Coated - (HSV-S-30187)
HELSO1-23040