METRIC TOOLING
Shop by category
All products in this category
-
3.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$155.303.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-030-415X$155.30 -
3.000 mm Cutter DIA x 9.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$155.303.000 mm Cutter DIA x 9.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-030-409X$155.30 -
3.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$146.803.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesMIC100-SBMM-030-215$146.80 -
2.000 mm Cutter DIA x 16.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$155.302.000 mm Cutter DIA x 16.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-020-416X$155.30 -
2.000 mm Cutter DIA x 10.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$155.302.000 mm Cutter DIA x 10.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-020-410X$155.30 -
2.000 mm Cutter DIA x 10.00 mm Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$146.802.000 mm Cutter DIA x 10.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBMM-020-410$146.80 -
2.000 mm Cutter DIA x 6.00 mm Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$155.302.000 mm Cutter DIA x 6.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedMIC100-SBMM-020-406X$155.30 -
2.000 mm Cutter DIA x 6.00 mm Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$146.802.000 mm Cutter DIA x 6.00 mm Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesMIC100-SBMM-020-406$146.80 -
Carbide - 10.000 mm Shank DIA x 72.0 mm OAL DE
MICRO 100
$112.1510.000 mm Shank DIA x 72.0 mm Overall Length - DECarbide Split BlanksMIC100-RSM-100-2$112.15 -
Carbide - 10.000 mm Shank DIA x 72.0 mm OAL
MICRO 100
$57.5010.000 mm Shank DIA x 72.0 mm Overall Length - Carbide Full Round BlanksMIC100-SRM-100-072$57.50 -
Carbide - 8.000 mm Shank DIA x 63.0 mm OAL DE
MICRO 100
$80.408.000 mm Shank DIA x 63.0 mm Overall Length - DECarbide Split BlanksMIC100-RSM-080-2$80.40 -
Carbide - 8.000 mm Shank DIA x 63.0 mm OAL
MICRO 100
$63.108.000 mm Shank DIA x 63.0 mm Overall Length - Carbide Split BlanksMIC100-RSM-080-1$63.10 -
Carbide - 6.000 mm Shank DIA x 57.0 mm OAL DE
MICRO 100
$44.756.000 mm Shank DIA x 57.0 mm Overall Length - DECarbide Split BlanksMIC100-RSM-060-2$44.75 -
Carbide - 6.000 mm Shank DIA x 57.0 mm OAL
MICRO 100
$24.156.000 mm Shank DIA x 57.0 mm Overall Length - Carbide Full Round BlanksMIC100-SRM-060-057$24.15 -
Carbide - 4.000 mm Shank DIA x 50.0 mm OAL
MICRO 100
$12.804.000 mm Shank DIA x 50.0 mm Overall Length - Carbide Full Round BlanksMIC100-SRM-040-050$12.80 -
Carbide - 3.000 mm Shank DIA x 38.0 mm OAL DE
MICRO 100
$24.453.000 mm Shank DIA x 38.0 mm Overall Length - DECarbide Split BlanksMIC100-RSM-030-2$24.45 -
Carbide - 2.000 mm Shank DIA x 38.0 mm OAL
MICRO 100
$10.002.000 mm Shank DIA x 38.0 mm Overall Length - Carbide Full Round BlanksMIC100-SRM-020-038$10.00 -
8.000 mm Shank DIA x 60° included
MICRO 100
$64.958.000 mm Shank DIA x 60° included Carbide Tipped EngraverMIC100-RSCM-080-1$64.95 -
6.000 mm Shank DIA x 60° included DE - AlTiN Coated
MICRO 100
$70.356.000 mm Shank DIA x 60° included Carbide Tipped Engraver DE, AlTiN CoatedMIC100-RSCM-060-2X$70.35 -
6.000 mm Shank DIA x 60° included DE
MICRO 100
$55.106.000 mm Shank DIA x 60° included Carbide Tipped Engraver DEMIC100-RSCM-060-2$55.10