MICRO 100
Shop by category
-
0.2500" (1/4) Shank DIA x 60° included DE - 1 FL
MICRO 100
$61.700.2500" (1/4) SHANK DIA X 60° INCLUDED CARBIDE TIPPED ENGRAVER DE, 1 FLUTEMIC100-RSC-250-230$61.70 -
1 FL - 12.000 mm Cutter DIA x 30.00 mm LOC, SFPM-120-10
MICRO 100
$122.3512.000 MM CUTTER DIA X 30.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-120-10$122.35 -
1 FL - 6.000 mm Cutter DIA x 16.00 mm LOC, SFPM-060-10
MICRO 100
$64.206.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-060-10$64.20 -
1 FL - 5.000 mm Cutter DIA x 28.00 mm LOC, SFPM-050-60
MICRO 100
$68.905.000 MM CUTTER DIA X 28.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-60$68.90 -
1 FL - 5.000 mm Cutter DIA x 28.00 mm LOC, SFPM-050-50
MICRO 100
$64.205.000 MM CUTTER DIA X 28.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-50$64.20 -
1 FL - 5.000 mm Cutter DIA x 16.00 mm LOC, SFPM-050-40
MICRO 100
$64.205.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-40$64.20 -
1 FL - 5.000 mm Cutter DIA x 16.00 mm LOC, SFPM-050-10
MICRO 100
$61.455.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-050-10$61.45 -
1 FL - 4.000 mm Cutter DIA x 20.00 mm LOC, SFPM-040-70
MICRO 100
$65.604.000 MM CUTTER DIA X 20.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-040-70$65.60 -
1 FL - 4.000 mm Cutter DIA x 12.00 mm LOC, SFPM-040-50
MICRO 100
$49.654.000 MM CUTTER DIA X 12.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-040-50$49.65 -
1 FL - 4.000 mm Cutter DIA x 12.00 mm LOC, SFPM-040-10
MICRO 100
$48.204.000 MM CUTTER DIA X 12.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-040-10$48.20 -
1 FL - 3.000 mm Cutter DIA x 18.00 mm LOC, SFPM-030-60
MICRO 100
$53.553.000 MM CUTTER DIA X 18.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-030-60$53.55 -
1 FL - 3.000 mm Cutter DIA x 8.00 mm LOC, SFPM-030-50
MICRO 100
$49.653.000 MM CUTTER DIA X 8.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-030-50$49.65 -
1 FL - 3.000 mm Cutter DIA x 8.00 mm LOC, SFPM-030-10
MICRO 100
$45.303.000 MM CUTTER DIA X 8.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-030-10$45.30 -
1 FL - 2.000 mm Cutter DIA x 6.00 mm LOC, SFPM-020-10
MICRO 100
$45.302.000 MM CUTTER DIA X 6.00 MM LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFPM-020-10$45.30 -
1 FL - 0.1875" (3/16) Cutter DIA x 0.625" (5/8) LOC, SFP-187-35
MICRO 100
$46.200.1875" (3/16) CUTTER DIA X 0.625" (5/8) LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTEMIC100-SFP-187-35$46.20 -
0.3750" (3/8) Shank DIA x 30° included DE - 1 FL
MICRO 100
$125.550.3750" (3/8) SHANK DIA X 30° INCLUDED CARBIDE TIPPED ENGRAVER DE, 1 FLUTEMIC100-RTC-375-2$125.55 -
0.3125" (5/16) Shank DIA x 30° included DE - 1 FL
MICRO 100
$101.100.3125" (5/16) SHANK DIA X 30° INCLUDED CARBIDE TIPPED ENGRAVER DE, 1 FLUTEMIC100-RTC-312-2$101.10 -
0.2500" (1/4) Shank DIA x 30° included DE - 1 FL, RTC-250-24
MICRO 100
$80.200.2500" (1/4) SHANK DIA X 30° INCLUDED CARBIDE TIPPED ENGRAVER DE, 1 FLUTEMIC100-RTC-250-24$80.20 -
0.2500" (1/4) Shank DIA x 30° included DE - 1 FL, RTC-250-230
MICRO 100
$53.300.2500" (1/4) SHANK DIA X 30° INCLUDED CARBIDE TIPPED ENGRAVER DE, 1 FLUTEMIC100-RTC-250-230$53.30 -
0.2500" (1/4) Shank DIA x 30° included DE - 1 FL - AlTiN Coated
MICRO 100
$74.250.2500" (1/4) SHANK DIA X 30° INCLUDED CARBIDE TIPPED ENGRAVER DE, 1 FLUTE, ALTIN COATEDMIC100-RTC-250-220X$74.25