5 Flute, Square - Variable Pitch - Metric (Aplus)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-030-50400)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 8.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-50400)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-015-50400)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 3.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-030-50300)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-50300)

*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 3.000 mm Cutter DIA x 6.000 mm Shank DIA x 4.500 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-015-50300)

6.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-015-50600)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 24.000 mm Length of Cut x 75.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-030-50800)

6.000 mm Cutter DIA x 6.000 mm Shank DIA x 18.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-030-50600)

25.000 mm Cutter DIA x 25.000 mm Shank DIA x 64.000 mm Length of Cut x 125.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-025-52500)

10.000 mm Cutter DIA x 10.000 mm Shank DIA x 15.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-015-51000)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-015-50800)

20.000 mm Cutter DIA x 20.000 mm Shank DIA x 50.000 mm Length of Cut x 125.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-025-52000)

12.000 mm Cutter DIA x 12.000 mm Shank DIA x 30.000 mm Length of Cut x 75.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-025-51200)

10.000 mm Cutter DIA x 10.000 mm Shank DIA x 25.000 mm Length of Cut x 75.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-025-51000)

25.000 mm Cutter DIA x 25.000 mm Shank DIA x 50.000 mm Length of Cut x 125.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-52500)

20.000 mm Cutter DIA x 20.000 mm Shank DIA x 40.000 mm Length of Cut x 100.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-52000)

16.000 mm Cutter DIA x 16.000 mm Shank DIA x 32.000 mm Length of Cut x 89.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-51600)

12.000 mm Cutter DIA x 12.000 mm Shank DIA x 24.000 mm Length of Cut x 75.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-51200)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 16.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-50800)