0.0200" (.5 mm) Cutter DIA x 0.0600" Length of Cut Carbide Square Downcut End Mill for Plastic, 2 Flutes, Amorphous Diamond Coated

0.3750" (3/8) Cutter DIA x 0.0300" Radius x 0.3000" Length of Cut x 2.0000" (2) Reach Carbide Corner Radius End Mill for Hard Milling, 4 Flutes, AlTiN Nano Coated

0.2500" (1/4) Cutter DIA x 0.0150" (1/64) Radius x 0.2000" Length of Cut x 1.2500" (1-1/4) Reach Carbide Corner Radius End Mill for Hard Milling, 4 Flutes, AlTiN Nano Coated

0.1180" (3 mm) Cutter DIA x 60° included Carbide Dovetail Cutter, 2 Flutes, AlTiN Coated

0.1180" (3 mm) Cutter DIA x 60° included Carbide Dovetail Cutter, 2 Flutes

0.1406" (9/64) Cutter DIA x 60° included Carbide Dovetail Cutter, 2 Flutes, AlTiN Coated

0.1406" (9/64) Cutter DIA x 60° included Carbide Dovetail Cutter, 2 Flutes

0.0780" (5/64) Cutter DIA x 0.0100" Radius x 0.1170" Length of Cut Carbide Corner Radius End Mill, 4 Flutes, Amorphous Diamond Coated

0.0250" Cutter DIA x 0.0080" Radius x 0.0380" Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated

0.0250" Cutter DIA x 0.0080" Radius x 0.0380" Length of Cut Carbide Corner Radius End Mill, 4 Flutes

0.1600" Cutter DIA x 1.1250" (1-1/8) Reach Carbide Single Form #12 Thread Milling Cutter, 4 Flutes, AlTiN Coated

0.1600" Cutter DIA x 1.1250" (1-1/8) Reach Carbide Single Form #12 Thread Milling Cutter, 4 Flutes

0.0620" (1/16) Cutter DIA x 0.0050" Radius x 0.0930" (3/32) Length of Cut Carbide Corner Radius End Mill, 4 Flutes, Amorphous Diamond Coated

0.0180" Cutter DIA x 0.0050" Radius x 0.0270" Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated

0.0180" Cutter DIA x 0.0050" Radius x 0.0270" Length of Cut Carbide Corner Radius End Mill, 4 Flutes

0.0200" (.5 mm) Cutter DIA x 0.0630" Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

0.0200" (.5 mm) Cutter DIA x 0.0630" Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes

0.0780" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

0.0780" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes

0.0470" (3/64) Cutter DIA x 0.1410" Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated