0.5000" (1/2) Cutter DIA x 0.7500" (3/4) Length of Cut x 2.6250" (2-5/8) Reach Carbide Square End Mill, 3 Flutes, AlTiN Coated

0.5000" (1/2) Cutter DIA x 0.7500" (3/4) Length of Cut x 2.6250" (2-5/8) Reach Carbide Square End Mill, 3 Flutes

0.2500" (1/4) Shank DIA x 0.0050" Flat x 90° included Carbide Tipped Engraver, 1 Flute, Amorphous Diamond Coated

0.2500" (1/4) Shank DIA x 0.0100" Flat x 60° included Carbide Tipped Engraver, 1 Flute, Amorphous Diamond Coated

0.1250" (1/8) Shank DIA x 0.0150" (1/64) Flat x 30° included Carbide Tipped Engraver, 1 Flute, Amorphous Diamond Coated

0.1410" Cutter DIA x 0.2109" Length of Cut x 4° 1.5000" (1-1/2) Taper Reach Carbide Ball End Mill, 2 Flutes, AlTiN Nano Coated

0.1410" Cutter DIA x 0.2109" Length of Cut x 4° 1.5000" (1-1/2) Taper Reach Carbide Ball End Mill, 2 Flutes

0.1410" Cutter DIA x 0.2109" Length of Cut x 4° 2.0000" (2) Taper Reach Carbide Ball End Mill, 2 Flutes, AlTiN Nano Coated

0.1410" Cutter DIA x 0.2109" Length of Cut x 4° 2.0000" (2) Taper Reach Carbide Ball End Mill, 2 Flutes

0.5000" (1/2) Shank DIA x 41° per side Carbide Flat Chamfer Cutter DE, 4 Flutes, AlTiN Coated

0.5000" (1/2) Shank DIA x 41° per side Carbide Flat Chamfer Cutter DE, 4 Flutes

0.1000" Cutter DIA x 0.1500" Length of Cut Carbide Square End Mill, 2 Flutes, Amorphous Diamond Coated

0.0230" Cutter DIA x 0.0350" Length of Cut Carbide Square End Mill, 2 Flutes, Amorphous Diamond Coated

0.0600" Cutter DIA x 0.3750" (3/8) Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN Coated

0.0600" Cutter DIA x 0.3750" (3/8) Length of Cut Carbide Square End Mill, 4 Flutes

0.1406" (9/64) Cutter DIA x 0.8750" (7/8) Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN Coated

0.1406" (9/64) Cutter DIA x 0.8750" (7/8) Length of Cut Carbide Square End Mill, 4 Flutes

0.0200" (.5 mm) Cutter DIA x 0.0300" Length of Cut x 2° 0.5000" (1/2) Taper Reach Carbide Ball End Mill, 2 Flutes

0.0930" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut Carbide Square End Mill for Exotic Alloys, 4 Flutes, AlTiN Nano Coated

5.000 mm Cutter DIA x 1.000 mm Radius x 7.500 mm Length of Cut Carbide Corner Radius End Mill for Exotic Alloys, 4 Flutes, AlTiN Nano Coated