HARVEY TOOL
-
3 FL - 0.1406" (9/64) Cutter DIA x 0.0150" (1/64) Radius x 0.4250" LOC
HARVEY TOOL
$31.000.1406" (9/64) Cutter DIA x 0.0150" (1/64) Radius x 0.4250" Length of Cut Carbide Corner Radius End Mill for Aluminum Alloys, 3 FlutesHARTO1-912409$31.00 -
0.0470" (3/64) Neck DIA x 0.1410" Reach x 30° per side - 2 FL - AlTiN Coated
HARVEY TOOL
$37.700.0470" (3/64) Neck DIA x 0.1410" Reach x 30° per side Carbide Pointed Chamfer Cutter, 2 Flutes, AlTiN CoatedHARTO1-911030-C3$37.70 -
0.0470" (3/64) Neck DIA x 0.1410" Reach x 30° per side - 2 FL
HARVEY TOOL
$31.800.0470" (3/64) Neck DIA x 0.1410" Reach x 30° per side Carbide Pointed Chamfer Cutter, 2 FlutesHARTO1-911030$31.80 -
Out of stock
3 FL - 0.800 mm Cutter DIA x 4.000 mm LOC - AlTiN Nano Coated
HARVEY TOOL
$46.700.800 mm Cutter DIA x 4.000 mm Length of Cut Carbide Square End Mill for Exotic Alloys, 3 Flutes, AlTiN Nano CoatedHARTO1-910518-C6$46.70 -
4 FL - 0.1562" (5/32) Cutter DIA x 0.0300" Radius x 0.2350" LOC x 0.7500" (3/4) Reach - AlTiN Nano Coated
HARVEY TOOL
$67.900.1562" (5/32) Cutter DIA x 0.0300" Radius x 0.2350" Length of Cut x 0.7500" (3/4) Reach Carbide Corner Radius End Mill for Exotic Alloys, 4 Flutes, AlTiN Nano CoatedHARTO1-910210-C6$67.90 -
Out of stock
0.0469" (3/64) Cutter DIA x 0.3120" (5/16) Neck Length x 270° Wrap Angle - 2 FL - AlTiN Coated
HARVEY TOOL
$93.300.0469" (3/64) Cutter DIA x 0.3120" (5/16) Neck Length x 270° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedHARTO1-909047-C3$93.30 -
0.0469" (3/64) Cutter DIA x 0.3120" (5/16) Neck Length x 270° Wrap Angle - 2 FL
HARVEY TOOL
$87.400.0469" (3/64) Cutter DIA x 0.3120" (5/16) Neck Length x 270° Carbide Undercutting End Mill, 2 FlutesHARTO1-909047$87.40 -
4 FL - 0.1875" (3/16) Cutter DIA x 0.0100" Radius x 0.2850" LOC x 1.5000" (1-1/2) Reach - AlTiN Nano Coated
HARVEY TOOL
$70.300.1875" (3/16) Cutter DIA x 0.0100" Radius x 0.2850" Length of Cut x 1.5000" (1-1/2) Reach Carbide Corner Radius End Mill for Exotic Alloys, 4 Flutes, AlTiN Nano CoatedHARTO1-908712-C6$70.30