HELICAL
3 FL - Ball - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
- SKU:
- HELSO1-89248
- Shipping:
- Calculated at Checkout
Description
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-M-30750-BN)
View AllClose
Related Products
Related Products
3 FL - Ball - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$262.45
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-M-30750-BN)
HELSO1-49420
5 FL - Square - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$289.90
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-030-50750)
HELSO1-89001
2 FL - Ball - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$224.60
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20750-BN)
HELSO1-83427
3 FL - Ball - 40¡ Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL
HELICAL
$318.20
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 40¡ Helix Ball End Mill for Aluminum, 3 Flutes - (H40ALV-M-30750-BN)
HELSO1-87844
3 FL - Ball - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$265.60
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide Ball End Mill for...
HELSO1-89249