HELICAL
3 FL - Ball - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
- SKU:
- HELSO1-89190
- Shipping:
- Calculated at Checkout
Description
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-M-30125-BN)
View AllClose
Related Products
Related Products
3 FL - Ball - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$34.20
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-M-30125-BN)
HELSO1-82453
2 FL - Ball - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$28.80
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20125-BN)
HELSO1-83411
3 FL - Ball - 40¡ Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL
HELICAL
$49.20
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40¡ Helix Ball End Mill for Aluminum, 3 Flutes - (H40ALV-M-30125-BN)
HELSO1-87817
3 FL - Ball - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$36.90
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89191
3 FL - Ball - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$27.10
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89188