SQUARE, HIGH BALANCE, REDUCED NECK
END MILLS FOR ALUMINUM AND NON FERROUS MATERIAL, 2 FLUTE,SQUARE REDUCED NECK
Engineered to impress in Makino MAG machining centers capable of elevated RPMs and feed rates, the HMG-RN-2 is precision balanced for high velocity machining in aluminum (up to 33,000 rpm).
-
2 FL - Square - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 4.2500" (4-1/4) OAL x 2.6250" (2-5/8) Reach - Uncoated
HELICAL
$346.801.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 4.2500" (4-1/4) Overall Length x 2.6250" (2-5/8) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-026-21000)HELSO1-60016$346.80 -
2 FL - Square - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 4.2500" (4-1/4) OAL x 2.3750" (2-3/8) Reach - Uncoated
HELICAL
$334.001.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 4.2500" (4-1/4) Overall Length x 2.3750" (2-3/8) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-023-21000)HELSO1-60013$334.00 -
2 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 4.2500" (4-1/4) OAL x 2.7500" (2-3/4) Reach - Uncoated
HELICAL
$87.170.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 4.2500" (4-1/4) Overall Length x 2.7500" (2-3/4) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-055-20500)HELSO1-59995$87.17 -
2 FL - Square - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 4.2500" (4-1/4) OAL x 2.5000" (2-1/2) Reach - Uncoated
HELICAL
$111.800.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 4.2500" (4-1/4) Overall Length x 2.5000" (2-1/2) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-050-20500)HELSO1-59992$111.80