SQUARE, HIGH BALANCE, REDUCED NECK
END MILLS FOR ALUMINUM AND NON FERROUS MATERIAL, 2 FLUTE,SQUARE REDUCED NECK
Engineered to impress in Makino MAG machining centers capable of elevated RPMs and feed rates, the HMG-RN-2 is precision balanced for high velocity machining in aluminum (up to 33,000 rpm).
-
2 FL - Square - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) LOC x 3.2500" (3-1/4) OAL x 2.0000" (2) Reach - Uncoated
HELICAL
$81.700.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 3.2500" (3-1/4) Overall Length x 2.0000" (2) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-053-20375)HELSO1-59977$81.70 -
2 FL - Square - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) LOC x 3.2500" (3-1/4) OAL x 1.7500" (1-3/4) Reach - Uncoated
HELICAL
$80.200.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 3.2500" (3-1/4) Overall Length x 1.7500" (1-3/4) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-046-20375)HELSO1-59974$80.20 -
2 FL - Square - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) LOC x 2.7500" (2-3/4) OAL x 1.5000" (1-1/2) Reach - Uncoated
HELICAL
$77.000.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 2.7500" (2-3/4) Overall Length x 1.5000" (1-1/2) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-040-20375)HELSO1-59971$77.00 -
2 FL - Square - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) LOC x 2.2500" (2-1/4) OAL x 1.1250" (1-1/8) Reach - Uncoated
HELICAL
$73.800.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 2.2500" (2-1/4) Overall Length x 1.1250" (1-1/8) Reach Carbide Square End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-RN-030-20375)HELSO1-59968$73.80