SPECIALTY
-
0.0781" (5/64) Cutter DIA x 0.1250" (1/8) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $15.19Was: $16.870.0781" (5/64) Cutter DIA x 0.1250" (1/8) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN CoatedTC91105Now: $15.19Was: $16.87 -
0.0625" (1/16) Cutter DIA x 0.1250" (1/8) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $10.38Was: $11.530.0625" (1/16) Cutter DIA x 0.1250" (1/8) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN CoatedTC91104Now: $10.38Was: $11.53 -
0.0469" (3/64) Cutter DIA x 0.0938" Length of Cut Carbide Square End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $12.62Was: $14.020.0469" (3/64) Cutter DIA x 0.0938" Length of Cut Carbide Square End Mill, 3 Flutes, TiCN CoatedTC91103Now: $12.62Was: $14.02 -
0.0313" Cutter DIA x 0.0625" (1/16) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $12.62Was: $14.020.0313" Cutter DIA x 0.0625" (1/16) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN CoatedTC91102Now: $12.62Was: $14.02 -
0.0156" (1/64) Cutter DIA x 0.0230" Length of Cut Carbide Square End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $18.46Was: $20.510.0156" (1/64) Cutter DIA x 0.0230" Length of Cut Carbide Square End Mill, 3 Flutes, TiCN CoatedTC91101Now: $18.46Was: $20.51 -
0.3750" (3/8) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0100" Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, Uncoated
TITAN USA
Now: $35.98Was: $39.970.3750" (3/8) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0100" Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, UncoatedTC85156Now: $35.98Was: $39.97 -
0.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0100" Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, Uncoated
TITAN USA
Now: $29.07Was: $32.290.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0100" Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, UncoatedTC85154Now: $29.07Was: $32.29 -
0.2500" (1/4) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0100" Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, Uncoated
TITAN USA
Now: $23.04Was: $25.590.2500" (1/4) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0100" Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, UncoatedTC85152Now: $23.04Was: $25.59