SPECIALTY PROFILES
-
0.2500" (1/4) Cutter DIA x 0.7500" (3/4) LOC x 82° included - 3 FL - AlTiN Coated
HARVEY TOOL
$63.170.2500" (1/4) Cutter DIA x 0.7500" (3/4) Length of Cut x 82° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-725516-C3$63.17 -
0.2500" (1/4) Cutter DIA x 0.7500" (3/4) LOC x 82° included - 3 FL
HARVEY TOOL
$54.300.2500" (1/4) Cutter DIA x 0.7500" (3/4) Length of Cut x 82° included Carbide Drill/End Mill, 3 FlutesHARTO1-725516$54.30 -
0.1250" (1/8) Cutter DIA x 0.5000" (1/2) LOC x 82° included - 3 FL - AlTiN Coated
HARVEY TOOL
$43.380.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 82° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-725508-C3$43.38 -
0.1250" (1/8) Cutter DIA x 0.5000" (1/2) LOC x 82° included - 3 FL
HARVEY TOOL
$36.900.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 82° included Carbide Drill/End Mill, 3 FlutesHARTO1-725508$36.90 -
0.0470" (3/64) Neck DIA x 0.7100" Reach x 45° per side - 2 FL - AlTiN Coated
HARVEY TOOL
$54.680.0470" (3/64) Neck DIA x 0.7100" Reach x 45° per side Carbide Pointed Chamfer Cutter, 2 Flutes, AlTiN CoatedHARTO1-725345-C3$54.68 -
0.0470" (3/64) Neck DIA x 0.7100" Reach x 45° per side - 2 FL
HARVEY TOOL
$48.200.0470" (3/64) Neck DIA x 0.7100" Reach x 45° per side Carbide Pointed Chamfer Cutter, 2 FlutesHARTO1-725345$48.20 -
0.0390" (1 mm) Neck DIA x 0.3250" Reach x 45° per side - 2 FL - AlTiN Coated
HARVEY TOOL
$46.580.0390" (1 mm) Neck DIA x 0.3250" Reach x 45° per side Carbide Pointed Chamfer Cutter, 2 Flutes, AlTiN CoatedHARTO1-725245-C3$46.58 -
0.0390" (1 mm) Neck DIA x 0.3250" Reach x 45° per side - 2 FL
HARVEY TOOL
$40.100.0390" (1 mm) Neck DIA x 0.3250" Reach x 45° per side Carbide Pointed Chamfer Cutter, 2 FlutesHARTO1-725245$40.10