SPECIALTY PROFILES
-
0.1180" (3 mm) Cutter DIA x 0.0590" Width x 0.4380" Neck Length - 90° Included Angle - 2 FL - AlTiN Coated
HARVEY TOOL
$82.580.1180" (3 mm) Cutter DIA x 0.0590" Width x 0.4380" Neck Length Carbide Double Angle Shank Cutter, 2 Flutes, AlTiN CoatedHARTO1-82213M-C3$82.58 -
0.1180" (3 mm) Cutter DIA x 0.0590" Width x 0.4380" Neck Length - 90° Included Angle - 2 FL
HARVEY TOOL
$76.100.1180" (3 mm) Cutter DIA x 0.0590" Width x 0.4380" Neck Length Carbide Double Angle Shank Cutter, 2 FlutesHARTO1-82213M$76.10 -
0.2500" (1/4) Cutter DIA x 0.1250" (1/8) Width - 90° Included Angle - 6 FL - AlTiN Coated
HARVEY TOOL
$130.010.2500" (1/4) Cutter DIA x 0.1250" (1/8) Width Carbide Reduced Shank Double Angle Shank Cutter, 6 Flutes, AlTiN CoatedHARTO1-777903-C3$130.01 -
0.2500" (1/4) Cutter DIA x 0.1250" (1/8) Width - 90° Included Angle - 6 FL
HARVEY TOOL
$120.000.2500" (1/4) Cutter DIA x 0.1250" (1/8) Width Carbide Reduced Shank Double Angle Shank Cutter, 6 FlutesHARTO1-777903$120.00 -
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Neck Length x 270° Wrap Angle - 6 FL - AlTiN Nano Coated
HARVEY TOOL
$61.900.1250" (1/8) Cutter DIA x 0.7500" (3/4) Neck Length x 270° Carbide Undercutting End Mill for Hardened Steels, 6 Flutes, AlTiN Nano CoatedHARTO1-725708-C6$61.90 -
0.1250" (1/8) Cutter DIA x 0.5000" (1/2) LOC x 82° included - 3 FL - AlTiN Coated
HARVEY TOOL
$43.380.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 82° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-725508-C3$43.38 -
0.1250" (1/8) Cutter DIA x 0.5000" (1/2) LOC x 82° included - 3 FL
HARVEY TOOL
$36.900.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 82° included Carbide Drill/End Mill, 3 FlutesHARTO1-725508$36.90 -
0.0470" (3/64) Neck DIA x 0.7100" Reach x 45° per side - 2 FL - AlTiN Coated
HARVEY TOOL
$54.680.0470" (3/64) Neck DIA x 0.7100" Reach x 45° per side Carbide Pointed Chamfer Cutter, 2 Flutes, AlTiN CoatedHARTO1-725345-C3$54.68