SPECIALTY PROFILES
-
0.1562" (5/32) Cutter DIA x 0.0310" (1/32) Width x 0.2340" (15/64) Neck Length - Standard Slotting - 6 FL - AlTiN Coated
HARVEY TOOL
$92.700.1562" (5/32) Cutter DIA x 0.0310" (1/32) Width x 0.2340" (15/64) Neck Length CarbideSquare Standard Stagger Keyseat Cutter, 6 Flutes, AlTiN Coated744831-C3$92.70 -
0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 30° included DE - 1 FL - AlTiN Coated
HARVEY TOOL
$48.300.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 30° included Carbide Radius Engraver DE, 1 Flute, AlTiN Coated744508-C3$48.30 -
0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 60° included DE - 1 FL - AlTiN Coated
HARVEY TOOL
$49.900.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 60° included Carbide Radius Engraver DE, 1 Flute, AlTiN Coated743808-C3$49.90 -
0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 90° included DE - 1 FL - AlTiN Coated
HARVEY TOOL
$49.900.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 90° included Carbide Radius Engraver DE, 1 Flute, AlTiN Coated743208-C3$49.90 -
0.0400" Cutter DIA x 0.1250" (1/8) LOC x 90° included - 2 FL - AlTiN Coated
HARVEY TOOL
$42.600.0400" Cutter DIA x 0.1250" (1/8) Length of Cut x 90° included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated72240-C3$42.60 -
0.0390" (1 mm) Cutter DIA x 0.1250" (1/8) LOC x 90° included - 2 FL - AlTiN Coated
HARVEY TOOL
$42.600.0390" (1 mm) Cutter DIA x 0.1250" (1/8) Length of Cut x 90° included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated72239-C3$42.60 -
0.0200" (.5 mm) Cutter DIA x 0.0630" LOC x 90° included - 2 FL - AlTiN Coated
HARVEY TOOL
$42.600.0200" (.5 mm) Cutter DIA x 0.0630" Length of Cut x 90° included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated72220-C3$42.60 -
0.1562" (5/32) Cutter DIA x 0.0780" (5/64) Width x 0.8750" (7/8) Neck Length - 90° Included Angle - 4 FL - AlTiN Coated
HARVEY TOOL
$79.900.1562" (5/32) Cutter DIA x 0.0780" (5/64) Width x 0.8750" (7/8) Neck Length Carbide Double Angle Shank Cutter, 4 Flutes, AlTiN Coated71756-C3$79.90