MATERIAL SPECIFIC END MILLS
-
Out of stock
5 FL - 0.5000" (1/2) Cutter DIA x 1.250" (1-1/4) LOC - nACRo® Coated
MICRO 100
$98.650.5000" (1/2) Cutter DIA x 1.250" (1-1/4) Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® CoatedVHM-5125-5K$98.65 -
Out of stock
5 FL - 0.5000" (1/2) Cutter DIA x 1.250" (1-1/4) LOC
MICRO 100
$84.900.5000" (1/2) Cutter DIA x 1.250" (1-1/4) Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 5 FlutesVHM-5125-5$84.90 -
Out of stock
4 FL - 0.5000" (1/2) Cutter DIA x 0.030" Radius x 1.250" (1-1/4) LOC - AlTiN Coated
MICRO 100
$94.600.5000" (1/2) Cutter DIA x 0.030" Radius x 1.250" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVHM-5125-4X$94.60 -
4 FL - 0.5000" (1/2) Cutter DIA x 0.030" Radius x 1.250" (1-1/4) LOC
MICRO 100
$85.850.5000" (1/2) Cutter DIA x 0.030" Radius x 1.250" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVHM-5125-4$85.85 -
Out of stock
4 FL - 0.1250" (1/8) Cutter DIA x 0.010" Radius x 0.500" (1/2) LOC - AlTiN Coated
MICRO 100
$19.250.1250" (1/8) Cutter DIA x 0.010" Radius x 0.500" (1/2) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVHM-125-4X$19.25 -
1 FL - 0.1250" (1/8) Cutter DIA x 0.500" (1/2) LOC
MICRO 100
$31.450.1250" (1/8) Cutter DIA x 0.500" (1/2) Length of Cut Carbide Square Upcut for Plastic, 1 FluteSFP-125-24$31.45 -
Out of stock
0.1250" (1/8) Cutter DIA x 0.500" (1/2) LOC x 135° included - 7 RH Teeth, 9 LH Teeth
MICRO 100
$16.500.1250" (1/8) Cutter DIA x 0.500" (1/2) Length of Cut x 135° included Carbide Diamond Cut End Mill, 7 RH Teeth, 9 LH TeethRDD-30$16.50 -
Out of stock
0.0938" Cutter DIA x 0.375" (3/8) LOC x 135° included - 7 RH Teeth, 9 LH Teeth
MICRO 100
$16.500.0938" Cutter DIA x 0.375" (3/8) Length of Cut x 135° included Carbide Diamond Cut End Mill, 7 RH Teeth, 9 LH TeethRDD-20$16.50