DRILL
Shop by category
-
0.0200" (.5 mm) Cutter DIA x 0.0630" LOC x 60° included - 2 FL
HARVEY TOOL
$48.600.0200" (.5 mm) Cutter DIA x 0.0630" Length of Cut x 60° included Carbide Drill/End Mill, 2 FlutesHARTO1-991767$48.60 -
0.0780" (5/64) Cutter DIA x 0.2500" (1/4) LOC x 60° included - 2 FL - AlTiN Coated
HARVEY TOOL
$56.300.0780" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes, AlTiN CoatedHARTO1-991705-C3$56.30 -
0.0780" (5/64) Cutter DIA x 0.2500" (1/4) LOC x 60° included - 2 FL
HARVEY TOOL
$48.600.0780" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 60° included Carbide Drill/End Mill, 2 FlutesHARTO1-991705$48.60 -
0.0470" (3/64) Cutter DIA x 0.1410" LOC x 60° included - 2 FL - AlTiN Coated
HARVEY TOOL
$56.300.0470" (3/64) Cutter DIA x 0.1410" Length of Cut x 60° included Carbide Drill/End Mill, 2 Flutes, AlTiN CoatedHARTO1-991703-C3$56.30 -
0.0470" (3/64) Cutter DIA x 0.1410" LOC x 60° included - 2 FL
HARVEY TOOL
$48.600.0470" (3/64) Cutter DIA x 0.1410" Length of Cut x 60° included Carbide Drill/End Mill, 2 FlutesHARTO1-991703$48.60 -
0.1562" (5/32) Cutter DIA x 0.5620" (9/16) LOC x 120° included - 2 FL - AlTiN Coated
HARVEY TOOL
$61.100.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 120° included Carbide Drill/End Mill, 2 Flutes, AlTiN CoatedHARTO1-985510-C3$61.10 -
0.1562" (5/32) Cutter DIA x 0.5620" (9/16) LOC x 120° included - 2 FL
HARVEY TOOL
$53.100.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 120° included Carbide Drill/End Mill, 2 FlutesHARTO1-985510$53.10 -
0.0930" Cutter DIA x 0.3750" (3/8) LOC x 100° included - 2 FL - AlTiN Coated
HARVEY TOOL
$57.000.0930" Cutter DIA x 0.3750" (3/8) Length of Cut x 100° included Carbide Drill/End Mill, 2 Flutes, AlTiN CoatedHARTO1-928593-C3$57.00 -
0.0930" Cutter DIA x 0.3750" (3/8) LOC x 100° included - 2 FL
HARVEY TOOL
$49.300.0930" Cutter DIA x 0.3750" (3/8) Length of Cut x 100° included Carbide Drill/End Mill, 2 FlutesHARTO1-928593$49.30 -
0.0620" Cutter DIA x 0.1870" (3/16) LOC x 100° included - 2 FL - AlTiN Coated
HARVEY TOOL
$57.000.0620" Cutter DIA x 0.1870" (3/16) Length of Cut x 100° included Carbide Drill/End Mill, 2 Flutes, AlTiN CoatedHARTO1-928562-C3$57.00 -
0.0620" Cutter DIA x 0.1870" (3/16) LOC x 100° included - 2 FL
HARVEY TOOL
$49.300.0620" Cutter DIA x 0.1870" (3/16) Length of Cut x 100° included Carbide Drill/End Mill, 2 FlutesHARTO1-928562$49.30 -
0.5000" (1/2) Cutter DIA x 1.0000" (1) LOC x 90° included - 4 FL - AlTiN Coated
HARVEY TOOL
$188.800.5000" (1/2) Cutter DIA x 1.0000" (1) Length of Cut x 90° included Carbide Drill/End Mill, 4 Flutes, AlTiN CoatedHARTO1-824032-C3$188.80 -
0.5000" (1/2) Cutter DIA x 1.0000" (1) LOC x 90° included - 4 FL
HARVEY TOOL
$164.100.5000" (1/2) Cutter DIA x 1.0000" (1) Length of Cut x 90° included Carbide Drill/End Mill, 4 FlutesHARTO1-824032$164.10 -
0.5000" (1/2) Cutter DIA x 1.0000" (1) LOC x 90° included - 3 FL - AlTiN Coated
HARVEY TOOL
$142.700.5000" (1/2) Cutter DIA x 1.0000" (1) Length of Cut x 90° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-823832-C3$142.70 -
0.3125" (5/16) Cutter DIA x 0.8120" (13/16) LOC x 90° included - 3 FL - AlTiN Coated
HARVEY TOOL
$87.000.3125" (5/16) Cutter DIA x 0.8120" (13/16) Length of Cut x 90° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-823820-C3$87.00 -
0.3125" (5/16) Cutter DIA x 0.8120" (13/16) LOC x 90° included - 3 FL
HARVEY TOOL
$74.600.3125" (5/16) Cutter DIA x 0.8120" (13/16) Length of Cut x 90° included Carbide Drill/End Mill, 3 FlutesHARTO1-823820$74.60 -
0.1562" (5/32) Cutter DIA x 0.5620" (9/16) LOC x 90° included - 3 FL - AlTiN Coated
HARVEY TOOL
$53.700.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 90° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-823810-C3$53.70 -
0.1562" (5/32) Cutter DIA x 0.5620" (9/16) LOC x 90° included - 3 FL
HARVEY TOOL
$45.700.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 90° included Carbide Drill/End Mill, 3 FlutesHARTO1-823810$45.70 -
0.0930" (3/32) Cutter DIA x 0.3750" (3/8) LOC x 90° included - 3 FL
HARVEY TOOL
$43.500.0930" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 90° included Carbide Drill/End Mill, 3 FlutesHARTO1-823793$43.50 -
0.0620" (1/16) Cutter DIA x 0.1870" (3/16) LOC x 90° included - 3 FL - AlTiN Coated
HARVEY TOOL
$52.600.0620" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 90° included Carbide Drill/End Mill, 3 Flutes, AlTiN CoatedHARTO1-823762-C3$52.60