HELICAL
2 FL - Ball - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
- SKU:
- HELSO1-83411
- MPN:
- 83411
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20125-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.6250" (5/8) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
2 |
LOC Multiple: |
(5x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$24.20
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20125)
HELSO1-83405
3 FL - Ball - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$30.30
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89190
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$24.50
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-M-30125)
HELSO1-81551
3 FL - Ball - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$34.20
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-M-30125-BN)
HELSO1-82453
2 FL - Ball - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$34.95
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-83412