MICRO 100
-
#11-32 - 0.5000" (1/2) Cutter DIA - 5 FL
MICRO 100
$117.900.5000" (1/2) Cutter DIA Carbide Single Form - Reduced Shank #11-32 Thread Milling Cutter, 5 FlutesTM-500$117.90 -
Out of stock
5 FL - 0.3125" (5/16) Cutter DIA x 0.020" Radius x 1.125" (1-1/8) LOC - nACRo® Coated
MICRO 100
$58.400.3125" (5/16) Cutter DIA x 0.020" Radius x 1.125" (1-1/8) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® CoatedVLM-312-5-020K$58.40 -
Out of stock
5 FL - 0.3125" (5/16) Cutter DIA x 0.020" Radius x 0.500" (1/2) LOC - nACRo® Coated
MICRO 100
$48.400.3125" (5/16) Cutter DIA x 0.020" Radius x 0.500" (1/2) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® CoatedVHS-312-5-020K$48.40 -
Out of stock
5 FL - 0.3125" (5/16) Cutter DIA x 0.020" Radius x 0.500" (1/2) LOC
MICRO 100
$40.800.3125" (5/16) Cutter DIA x 0.020" Radius x 0.500" (1/2) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 FlutesVHS-312-5-020$40.80 -
Out of stock
#11-32 - 0.5000" (1/2) CUTTER DIA - 5 FL - ALTIN COATED,TM-500X
MICRO 100
$126.050.5000" (1/2) CUTTER DIA CARBIDE SINGLE FORM - REDUCED SHANK #11-32 THREAD MILLING CUTTER, 5 FLUTES, ALTIN COATED,TM-500XTM-500X$126.05 -
0.5000" (1/2) CUTTER DIA X 0.100" WIDTH (TSC) - 5 FL,MTR-500
MICRO 100
$120.300.5000" (1/2) CUTTER DIA X 0.100" WIDTH (TSC) CARBIDE THREAD RELIEF CUTTER, 5 FLUTES,MTR-500MTR-500$120.30 -
0.5000" (1/2) CUTTER DIA X 0.125" (1/8) WIDTH - 90?ø INCLUDED ANGLE - 5 FL,MBC-500
MICRO 100
$118.000.5000" (1/2) CUTTER DIA X 0.125" (1/8) WIDTH CARBIDE BACK CHAMFER CUTTER, 5 FLUTES,MBC-500MBC-500$118.00 -
5 FL - 0.3125" (5/16) CUTTER DIA X 0.020" RADIUS X 0.813" LOC - ALTIN COATED,ARC-312-5-020X
MICRO 100
$57.800.3125" (5/16) CUTTER DIA X 0.020" RADIUS X 0.813" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL FOR STEELS AND HIGH TEMPERATURE ALLOYS, 5 FLUTES, ALTIN COATED,ARC-312-5-020XARC-312-5-020X$57.80