MICRO 100
-
Out of stock
4 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 10.00 mm LOC x 50.00 mm Reach - AlTiN Coated
MICRO 100
$69.008.000 mm Cutter DIA x 0.50 mm Radius x 10.00 mm Length of Cut x 50.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVLRM-080-4X$69.00 -
4 FL - 6.000 mm Cutter DIA x 0.50 mm Radius x 8.00 mm LOC x 30.00 mm Reach - AlTiN Coated
MICRO 100
$67.306.000 mm Cutter DIA x 0.50 mm Radius x 8.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVLRM-060-4X$67.30 -
4 FL - 6.000 mm Cutter DIA x 0.50 mm Radius x 8.00 mm LOC x 30.00 mm Reach
MICRO 100
$61.256.000 mm Cutter DIA x 0.50 mm Radius x 8.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVLRM-060-4$61.25 -
Out of stock
4 FL - 12.000 mm Cutter DIA x 0.60 mm Radius x 26.00 mm LOC
MICRO 100
$69.5012.000 mm Cutter DIA x 0.60 mm Radius x 26.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVHMM-120-4$69.50 -
4 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm LOC - AlTiN Coated
MICRO 100
$50.808.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVHMM-080-4X$50.80 -
Out of stock
4 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm LOC
MICRO 100
$38.208.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVHMM-080-4$38.20 -
Out of stock
4 FL - 6.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm LOC - AlTiN Coated
MICRO 100
$38.706.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVHMM-060-4X$38.70 -
4 FL - 4.000 mm Cutter DIA x 0.50 mm Radius x 11.00 mm LOC
MICRO 100
$30.204.000 mm Cutter DIA x 0.50 mm Radius x 11.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVHMM-040-4$30.20 -
4 FL - 3.000 mm Cutter DIA x 0.50 mm Radius x 8.00 mm LOC - AlTiN Coated
MICRO 100
$24.953.000 mm Cutter DIA x 0.50 mm Radius x 8.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVHMM-030-4X$24.95 -
Out of stock
4 FL - 20.000 mm Cutter DIA x 45.00 mm LOC - AlTiN Coated
MICRO 100
$294.9520.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedSHRM-200-4X$294.95 -
4 FL - 14.000 mm Cutter DIA x 35.00 mm LOC - AlTiN Coated
MICRO 100
$176.4014.000 mm Cutter DIA x 35.00 mm Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedSHRM-140-4X$176.40 -
Out of stock
4 FL - 12.000 mm Cutter DIA x 30.00 mm LOC - AlTiN Coated
MICRO 100
$100.2512.000 mm Cutter DIA x 30.00 mm Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedSHRM-120-4X$100.25