MICRO 100
-
4 FL - 0.3750" (3/8) Cutter DIA x 0.020" Radius x 0.750" (3/4) LOC x 2.750" (2-3/4) Reach - AlTiN Coated
MICRO 100
$98.900.3750" (3/8) Cutter DIA x 0.020" Radius x 0.750" (3/4) Length of Cut x 2.750" (2-3/4) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN CoatedVLR-375-4X$98.90 -
Out of stock
4 FL - 0.3750" (3/8) Cutter DIA x 0.020" Radius x 0.875" (7/8) LOC
MICRO 100
$42.900.3750" (3/8) Cutter DIA x 0.020" Radius x 0.875" (7/8) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVHM-375-4$42.90 -
9/16-18 - 0.3700" Cutter DIA x 0.875" (7/8) LOC - 4 FL - AlTiN Coated
MICRO 100
$259.250.3700" Cutter DIA x 0.875" (7/8) Length of Cut Carbide Multi-Form 9/16-18 Thread Milling Cutter, 4 Flutes, AlTiN CoatedTM-562-18X$259.25 -
9/16-18 - 0.3700" Cutter DIA x 0.875" (7/8) LOC - 4 FL
MICRO 100
$252.450.3700" Cutter DIA x 0.875" (7/8) Length of Cut Carbide Multi-Form 9/16-18 Thread Milling Cutter, 4 FlutesTM-562-18$252.45 -
9/16-12 - 0.3700" Cutter DIA x 0.875" (7/8) LOC - 4 FL - AlTiN Coated
MICRO 100
$258.550.3700" Cutter DIA x 0.875" (7/8) Length of Cut Carbide Multi-Form 9/16-12 Thread Milling Cutter, 4 Flutes, AlTiN CoatedTM-562-12X$258.55 -
7/16-20 - 0.3350" Cutter DIA x 0.875" (7/8) LOC - 4 FL - AlTiN Coated
MICRO 100
$259.250.3350" Cutter DIA x 0.875" (7/8) Length of Cut Carbide Multi-Form 7/16-20 Thread Milling Cutter, 4 Flutes, AlTiN CoatedTM-437-20X$259.25 -
7/16-20 - 0.3350" Cutter DIA x 0.875" (7/8) LOC - 4 FL
MICRO 100
$252.450.3350" Cutter DIA x 0.875" (7/8) Length of Cut Carbide Multi-Form 7/16-20 Thread Milling Cutter, 4 FlutesTM-437-20$252.45 -
0.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Wrap Angle - 4 FL - AlTiN Coated
MICRO 100
$169.200.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Carbide Undercutting End Mill, 4 Flutes, AlTiN CoatedSBM-375-4X$169.20 -
0.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$159.150.3750" (3/8) Cutter DIA x 0.800" Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesSBM-375-4$159.15 -
4 FL - 0.3750" (3/8) Cutter DIA x 0.625" (5/8) LOC
MICRO 100
$40.600.3750" (3/8) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 4 FlutesSEM-375-04$40.60 -
Out of stock
#14-40 - 0.2900" Cutter DIA x 1.000" (1) Reach - 4 FL - AlTiN Coated
MICRO 100
$118.450.2900" Cutter DIA x 1.000" (1) Reach Carbide Single Form #14-40 Thread Milling Cutter, 4 Flutes, AlTiN CoatedTM-290-16X$118.45 -
#14-40 - 0.2900" Cutter DIA x 1.000" (1) Reach - 4 FL
MICRO 100
$108.350.2900" Cutter DIA x 1.000" (1) Reach Carbide Single Form #14-40 Thread Milling Cutter, 4 FlutesTM-290-16$108.35