MICRO 100
-
4.000 mm Cutter DIA x 12.00 mm Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$104.254.000 mm Cutter DIA x 12.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedSBMM-040-212X$104.25 -
4.000 mm Cutter DIA x 12.00 mm Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$98.504.000 mm Cutter DIA x 12.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesSBMM-040-212$98.50 -
3.000 mm Cutter DIA x 21.00 mm Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$104.253.000 mm Cutter DIA x 21.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedSBMM-030-221X$104.25 -
3.000 mm Cutter DIA x 21.00 mm Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$98.503.000 mm Cutter DIA x 21.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesSBMM-030-221$98.50 -
3.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Wrap Angle - 2 FL - AlTiN Coated
MICRO 100
$104.253.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 Flutes, AlTiN CoatedSBMM-030-215X$104.25 -
3.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$98.503.000 mm Cutter DIA x 15.00 mm Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesSBMM-030-215$98.50 -
2 FL - 0.5000" (1/2) Cutter DIA x 0.625" (5/8) LOC - AlTiN Coated
MICRO 100
$77.200.5000" (1/2) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-500-02X$77.20 -
Out of stock
2 FL - 0.3750" (3/8) Cutter DIA x 0.625" (5/8) LOC - AlTiN Coated
MICRO 100
$42.950.3750" (3/8) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-375-02X$42.95 -
2 FL - 0.3750" (3/8) Cutter DIA x 0.625" (5/8) LOC
MICRO 100
$40.600.3750" (3/8) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 2 FlutesSEM-375-02$40.60 -
2 FL - 0.3281" (21/64) Cutter DIA x 0.500" (1/2) LOC - AlTiN Coated
MICRO 100
$48.100.3281" (21/64) Cutter DIA x 0.500" (1/2) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-328-02X$48.10 -
2 FL - 0.3281" (21/64) Cutter DIA x 0.500" (1/2) LOC
MICRO 100
$40.600.3281" (21/64) Cutter DIA x 0.500" (1/2) Length of Cut Carbide Square End Mill, 2 FlutesSEM-328-02$40.60 -
Out of stock
2 FL - 0.3125" (5/16) Cutter DIA x 0.500" (1/2) LOC - AlTiN Coated
MICRO 100
$38.350.3125" (5/16) Cutter DIA x 0.500" (1/2) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-312-02X$38.35