MICRO 100
-
2 FL - 0.0120" (.3 mm) Cutter DIA x 0.036" LOC - AlTiN Coated
MICRO 100
$50.150.0120" (.3 mm) Cutter DIA x 0.036" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedMIC100-RME-012-2X$50.15 -
2 FL - 0.0110" Cutter DIA x 0.033" LOC - AlTiN Coated
MICRO 100
$50.150.0110" Cutter DIA x 0.033" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedMIC100-RME-011-2X$50.15 -
2 FL - 0.0100" Cutter DIA x 0.030" LOC - AlTiN Coated
MICRO 100
$55.200.0100" Cutter DIA x 0.030" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedMIC100-RME-010-2X$55.20 -
2 FL - 0.0100" Cutter DIA x 0.030" LOC
MICRO 100
$51.850.0100" Cutter DIA x 0.030" Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RME-010-2$51.85 -
0.0300" Drill DIA x 0.090" Flute Length - 2 FL
MICRO 100
$42.650.0300" Drill DIA x 0.090" Flute Length Carbide Quick Change - Spot Drill, 2 FlutesMIC100-QSPD-030-140$42.65 -
0.0150" (1/64) Drill DIA x 0.045" Flute Length - 2 FL
MICRO 100
$48.050.0150" (1/64) Drill DIA x 0.045" Flute Length Carbide Quick Change - Spot Drill, 2 FlutesMIC100-QSPD-015-120$48.05 -
0.5000" (1/2) Drill DIA x 1.000" (1) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$93.700.5000" (1/2) Drill DIA x 1.000" (1) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedMIC100-QSPD-500-140X$93.70 -
0.5000" (1/2) Drill DIA x 1.000" (1) Flute Length - 2 FL
MICRO 100
$79.650.5000" (1/2) Drill DIA x 1.000" (1) Flute Length Carbide Quick Change - Spot Drill, 2 FlutesMIC100-QSPD-500-140$79.65 -
0.3750" (3/8) Drill DIA x 1.000" (1) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$69.250.3750" (3/8) Drill DIA x 1.000" (1) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedMIC100-QSPD-375-100X$69.25 -
0.3750" (3/8) Drill DIA x 1.000" (1) Flute Length - 2 FL
MICRO 100
$59.000.3750" (3/8) Drill DIA x 1.000" (1) Flute Length Carbide Quick Change - Spot Drill, 2 FlutesMIC100-QSPD-375-100$59.00 -
2 FL - 1.500 mm Cutter DIA x 4.20 mm LOC
MICRO 100
$23.751.500 mm Cutter DIA x 4.20 mm Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RMEM-015-2$23.75 -
2 FL - 1.400 mm Cutter DIA x 4.20 mm LOC
MICRO 100
$23.751.400 mm Cutter DIA x 4.20 mm Length of Cut Carbide Square End Mill, 2 FlutesMIC100-RMEM-014-2$23.75