MICRO 100
-
0.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$39.050.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-187-100X$39.05 -
0.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length - 2 FL
MICRO 100
$33.950.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length Carbide Quick Change - Spot Drill, 2 FlutesQSPD-187-140$33.95 -
0.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-125-140X$37.65 -
0.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length - 2 FL
MICRO 100
$33.950.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length Carbide Quick Change - Spot Drill, 2 FlutesQSPD-125-140$33.95 -
2 FL - 0.1875" (3/16) Cutter DIA x 0.375" (3/8) LOC - AlTiN Coated
MICRO 100
$28.500.1875" (3/16) Cutter DIA x 0.375" (3/8) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-187-02X$28.50 -
2 FL - 0.1875" (3/16) Cutter DIA x 0.375" (3/8) LOC
MICRO 100
$24.800.1875" (3/16) Cutter DIA x 0.375" (3/8) Length of Cut Carbide Square End Mill, 2 FlutesSEM-187-02$24.80 -
2 FL - 0.1562" (5/32) Cutter DIA x 0.313" LOC - AlTiN Coated
MICRO 100
$28.500.1562" (5/32) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-156-02X$28.50 -
2 FL - 0.1562" (5/32) Cutter DIA x 0.313" LOC
MICRO 100
$24.800.1562" (5/32) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 2 FlutesSEM-156-02$24.80 -
2 FL - 0.1406" (9/64) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$28.500.1406" (9/64) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-140-02X$28.50 -
2 FL - 0.1406" (9/64) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$24.800.1406" (9/64) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 2 FlutesSEM-140-02$24.80 -
0.0300" Drill DIA x 0.090" Flute Length - 2 FL
MICRO 100
$38.800.0300" Drill DIA x 0.090" Flute Length Carbide Quick Change - Spot Drill, 2 FlutesQSPD-030-140$38.80 -
Out of stock
0.0250" Drill DIA x 0.075" Flute Length - 2 FL
MICRO 100
$36.000.0250" Drill DIA x 0.075" Flute Length Carbide Quick Change - Spot Drill, 2 FlutesQSPD-025-140$36.00